Speaking from memory, the RQ devices are DU in RSX. The DB RSX devices correspond to RP in simh.
Jordi Guillaumes Pons El 7 maig 2017, a les 21:05, Ray Jewhurst <raywjewhu...@gmail.com> va escriure: > Hello everyone, > I am trying to do my first installation and sysgen of RSX-11M+ (actually > first of any RSX-11!) and I am follow the instructions at > http://www.9track.net/pdp11/rsx4_sysgen and I am having problems right out of > the gate. When I try to copy the baseline system this is what I get: > > RSX-11M/RSX-11M-PLUS STANDALONE COPY SYSTEM V4.8 > > > RSX-11M/RSX-11M-PLUS Standalone Configuration and Disk Sizing Program > > Valid switches are: > /CSR=nnnnnn to change the default device CSR > /VEC=nnn to change the default device vector > /FOR=n to change the default magtape formatter number > /DEV to list all default device CSR and vectors > > > Enter first device: ms0: > > Enter second device: db0: > > Invalid device > > This is my config: > set cpu 11/73 > set rqb enable > set rq0 ra92 > set rq1 ra92 > set rq2 ra92 > set rq3 ra92 > set rqb0 ra92 > set rqb1 ra92 > set rqb2 rx50 > set rqb3 cdrom > set tm disable > set ts enable > set vh enable > set vh lines=16 > at rq0 d0.dsk > at rq1 d1.dsk > at rq2 d2.dsk > at rq3 d3.dsk > at rqb0 db0.dsk > at rqb1 db1.dsk > at ts BB-J0830-01.M01_RSX11M+_V4.6_1999.tap > set xq mac=08-00-2b-1a-2b-3c > at xq eth0 > set con telnet=1026 > b ts > > Every source I have found says that an rq disk in simh should be db in RSX > but it doesn't work. I have even tried other rq disks to no avail. I want > to do some experimenting and join HECNET eventually which is why I chose such > large drives. > > Any assistance would be kind and helpful. > Thanks, > Ray > > > _______________________________________________ > Simh mailing list > Simh@trailing-edge.com > http://mailman.trailing-edge.com/mailman/listinfo/simh
_______________________________________________ Simh mailing list Simh@trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh