Try typing "passive" after you log in, to toggle passive ftp mode (whether the client or server establishes the data channel). That may make a difference.
-Mark On Thu, Dec 7, 2017 at 8:34 AM, Shaun McCloud < shaun.thomas.mccl...@gmail.com> wrote: > Jordi, > > That works and I can get an IP address. I'm able to connect via FTP but I > am not able to get a directory listing and therefore get disconnected. Any > ideas on that? > > Shaun McCloud, MCDST > > On Thu, Dec 7, 2017 at 10:01 AM, Jordi Guillaumes Pons < > j...@jordi.guillaumes.name> wrote: > >> >> >> > On 7 Dec 2017, at 15:03, Shaun McCloud <shaun.thomas.mccl...@gmail.com> >> wrote: >> > >> > Tony & Jordi, >> > >> > Thank you for your help. When it comes to DECNET, I don't really care >> about that since right now I have a single VMS emulated system. I am >> running the current beta version so I will try it without the microcode. >> If I'm understanding correctly, unless I do TUN/TAP, VDE or SLiRP (NAT) I >> can't even connect to my emulated VAX via telnet or ftp? >> >> That’s correct. You can’t see the emulator from the host if you are using >> libpcap only networking. >> >> To set up an IP only network based on , do this: >> >> sim> attach xq nat:TCP=2323:10.0.2.15:23 TCP=2121:10.0.2.15:21 >> >> Simh will reply: >> >> libpcap version 1.8.1 -- Apple version 79.20.1 >> NAT args: TCP=2323:10.0.2.15:23 TCP=2121:10.0.2.15:21 >> NAT network setup: >> gateway =10.0.2.2/24(255.255.255.0) >> DNS =10.0.2.3 >> dhcp_start =10.0.2.15 >> redir TCP =2121:10.0.2.15:21 >> redir TCP =2323:10.0.2.15:23 >> Protocol[State] FD Source Address Port Dest. Address Port RecvQ >> SendQ >> TCP[HOST_FORWARD] 12 * 2121 10.0.2.15 21 >> 0 0 >> TCP[HOST_FORWARD] 11 * 2323 10.0.2.15 23 >> 0 0 >> Eth: opened OS device nat:TCP=2323:10.0.2.15:23 TCP=2121:10.0.2.15:21 >> >> Then, in the VAX side enable DHCP for QE0, setup 10.0.2.2 as gateway and >> 10.0.2.3. You will be able to telnet into your vax using telnet localhost >> 2323 and connect to the ftp server (supposing you enable them in TCP/IP >> services) at localhost port 2121. >> >> If you want DECNET, I recommend VDE, but tun/tap also works well if you >> do some bridge setup in your host >> >> >> > > _______________________________________________ > Simh mailing list > Simh@trailing-edge.com > http://mailman.trailing-edge.com/mailman/listinfo/simh >
_______________________________________________ Simh mailing list Simh@trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh