Thanks, Dave. I meant to try to double-check the settings. I don't have
physical access to the system, so I'll ask someone to double-check the card
and the switch.
I know it's currently as set to autosense. I'll try forcing the speed and
duplex.
Thanks!
Hunter
-------
Hunter Goatley, goathun...@goatley.com
On July 18, 2018 3:34:59 PM Dave Wade <dave.g4...@gmail.com> wrote:
Hunter,
Is it set to Autosense Speed and Duplex? Is it getting confused? Can it be
set to a fixed speed.
Dave
From: Simh <simh-boun...@trailing-edge.com> On Behalf Of Hunter Goatley
Sent: 18 July 2018 16:58
To: Simh <simh@trailing-edge.com>
Subject: Re: [Simh] Cluster communications errors
My mistake. I'm not running V4.0, I'm running V3.10-0 RC1.
After posting, it dawned on me that I should have tried SIMH V3.9.0, but it
fails to boot:
(BOOT/R5:0 DUA0
2..
-DUA0
1..0..
HALT instruction, PC: 00004C02 (HALT)
sim>
I'm not sure why. I'm using the KA655x.bin that came with V3.9.0 and a new
nvram.bin file, but everything else is the same as the V3.10-0 RC1 instance.
I just downloaded the current GitHub sources and compiled them (
<https://github.com/simh/simh/commit/15fd71b97c8aaec29dc1bbbd3473c3f0d582c9ff>
15fd71b). It boots, but I see the same behavior of losing connection to the
cluster.
I also should have mentioned that this dedicated Ethernet card is plugged
into the same switch as all of the other cluster members, so that shouldn't
be an issue.
Thanks.
Hunter
_______________________________________________
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
