I use a combination of Windows and Linux. I find xterm to have excellent emulation characteristics. On windows I use Putty and Cygwin terminals.
Now for the less ordinary: In order to use my LK450 keyboard (which only works properly when plugged into a PS/2 port direct, not via a USB dongle) I use an older copy of Hummingbird Exceed (bought off eBay as new-in-box a few years ago) on an old HP thin client terminal running Windows XP. This combination allows all the keys to be mapped correctly. I've always hated the fact that most combinations of DEC keyboards and PC computers left at least one or two keys incorrectly mapped. Having all keys mapped is a must when using ALL-IN-1 or WPS/PLUS. In the past I've also used a passive adapter and the Linux LK201/LK401 keyboard driver. The adapter converts the keyboard connector into an RS/232 feed and provides 9v power for the keyboard. This should still work as the driver is still a module in the linux kernel. I found the mapping mostly worked although some of the key combinations didn't map by default from the keyboard interface layer to useful X keycodes. I have a USB LK461 (I think that's the number) but I've not tried to get all the keys working. It works as a standard PC keyboard without any issue. Regards, Mark. On Mon, 30 Sep 2019 at 09:27, Matt Burke <[email protected]> wrote: > On 29/09/2019 16:19, Zane Healy wrote: > > I’d tried ZOC7, and a couple other solutions, before settling on > > SecureCRT. I have to have a properly functioning keypad. Even then I > > still have a DEC VT420, plugged into a DECserver sitting by my Mac. I > > love my VT420’s, but at times I like to be able to cut and paste. :-) > You can cut and paste with a VT420. Hold down the 'Hold Screen (F1)' key > and use the arrow keys to position the cursor. Then use 'Select' > followed by the arrow keys to highlight the text and 'Remove' to copy. > Then you can release the 'Hold Screen (F1) key. > The text is stored in a buffer and can be pasted by holding down the > 'Hold Screen (F1)' key again and pressing 'Insert Here'. > > Matt > _______________________________________________ > Simh mailing list > [email protected] > http://mailman.trailing-edge.com/mailman/listinfo/simh
_______________________________________________ Simh mailing list [email protected] http://mailman.trailing-edge.com/mailman/listinfo/simh
