inline. Nicolas Dramais wrote:
> Dear all, > > In a previous mail on this list (Tue, 27 Feb 2001 02:13:18 -0500), > Jonathan R. confirmed the following behavior: > "UAC should be ready to receive after INVITE. Prepared to send after 200 > OK. > > UAS shoudl be ready to receive after 200 OK, and may send after 200 OK > (indeed, this is needed to deal with a low post-pickup delay). > > Both of the above assume that SDP was present in the INVITE/200." > > I totally agree with that. > > However, once UAC has shooted its INVITE and is listening for RTP > packets, it cannot send any RTCP Receiver Report to the sender since it > doesn't the port to which to send it. > > Thus, is it true to say that the statement above implies that RTCP > Receiver Reports cannot be sent before reception of the 200 OK, or am I > missing something ? No, you are correct. I will mention this in the next rev of offer/answer. -Jonathan R. -- Jonathan D. Rosenberg, Ph.D. 72 Eagle Rock Avenue Chief Scientist First Floor dynamicsoft East Hanover, NJ 07936 [EMAIL PROTECTED] FAX: (973) 952-5050 http://www.jdrosen.net PH: (973) 952-5000 http://www.dynamicsoft.com _______________________________________________ Sip-implementors mailing list [EMAIL PROTECTED] http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
