Hi Jamkhandikar, SDP messages are case sensitive.
Only specified character set, like ISO-8859-1, should be compared by using case-insensitive comparison. Ismail -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jamkhandikar, Sunil Sent: Tuesday, November 29, 2005 4:38 PM To: [email protected] Subject: [Sip-implementors] SDP Problem Hi all, Is SDP value send in any SDP parameter Case-Sensitive...?? For eg. m=audio 8216 RTP/AVP 0 8 18 2 this is the way we generally send the SDP, Suppose we send the value "audio" in the following format, should the SIP stack accept the SDP value? 1. m= AUDIO 8216 RTP/AVP 0 8 18 2 2. m= AuDiO 8216 RTP/AVP 0 8 18 Also, are the other remaining SDP parameters Case Sensitive..??? Thanks, Sunil "This email message and any attachments are confidential information of Starent Networks, Corp. The information transmitted may not be used to create or change any contractual obligations of Starent Networks, Corp. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this e-mail and its attachments by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify the sender immediately -- by replying to this message or by sending an email to [EMAIL PROTECTED] -- and destroy all copies of this message and any attachments without reading or disclosing their contents. Thank you." _______________________________________________ Sip-implementors mailing list [email protected] http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors _______________________________________________ Sip-implementors mailing list [email protected] http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
