According to RFC 3261, 8.1.1.6 Max-Forwards : If the Max-Forwards value reaches
0 before the request reaches its destination, it will be rejected with a
483(Too Many Hops) error response.My doubts are a) If UAC receives this error
response what should be the behaviour of UAC at that time should UAC send new
Request with Max-Forwards value greater than earlier Max-Forwards value or what
UAC should dob) If UAS receives request with Max-Forwards value equal to zero
and it is the final recepient should it accept the request or it should send
483 Too Many Hops ??Thanks in advanceRegards,
Bhanuprasad KS
Global Edge Software Ltd.
www.globaledgesoft.com
" The Greatest Failure is not when Others put you down,
It is when you put down yourself "
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
for the use of the addressee(s). If you are not the intended recipient, please
notify the sender by e-mail and delete the original message.Global Edge
Software Ltd has taken every reasonable precaution to minimize this risk, but
is not liable for any damage you may sustain as a result of any virus in this
e-mail. You should carry out your own virus checks before opening the e-mail or
attachment. Global Edge Software Ltd reserves the right to monitor and review
the content of all messages sent to or from this e-mail address
_______________________________________________
Sip-implementors mailing list
[email protected]
https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors
