Inline. Regards, Gaurav
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:sip-implementors- > [EMAIL PROTECTED] On Behalf Of Adeyeye Michael > Sent: Wednesday, April 25, 2007 3:24 PM > To: [email protected] > Subject: [Sip-implementors] Using SER > > 1) Can I use two softphones(Linophone and Ekiga) on my machine to > simulate communication over SER? GK>> Sure, you can!! > 2) If so, will the two phones use same port with SER i.e. 5060 GK>> You'll be running into problems if you use the same port for SER as well as softphones. You are better off using different ports for each of the softphones & SER. Just modify the configuration of softphones to use a distinct port. > 3) Do I need to setup mediaproxy in this case since both phones are on > my machine? GK>> Not sure I understood this too well but I guess you are concerned about having 2 softphones running on same machine. You don't need any other entity. LinPhone <-> SER <-> Ekiga should work fine. Ekiga is a tough nut for starters so I suggest that you try a simpler tool like Xlite (http://www.counterpath.com/index.php?menu=download) In fact, you can do away with SER and use <Softphone> - <Softphone> using outbound proxy feature supported by most softphones. > Mike. > _______________________________________________ > Sip-implementors mailing list > [email protected] > https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors _______________________________________________ Sip-implementors mailing list [email protected] https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors
