Have you ever tried across a Cisco CUCM ?
Marco
2017-11-08 17:23 GMT+01:00 Šindelka Pavel <sinde...@ttc.cz>:
> Yes, provided that you bind each instance to a different port on the
> loopback interface (127.0.0.1). This is relevant for UDP, for TCP the
> client will choose an ephemeral port for establishing connection so it
> won't conflict, but there are other caveats.
>
> Pavel Šindelka
>
> Dne 8. 11. 2017 5:18 odpoledne napsal uživatel Marco Menozzi <
> mmenozz...@gmail.com>:
>
> Understood.
>
> Is it possible to perform it running uac.xml and uas.xml from same laptop ?
>
> Marco
>
> 2017-11-08 17:17 GMT+01:00 Šindelka Pavel <sinde...@ttc.cz>:
>
> In your scenario, sipp running uas.xml replaces the B party and sipp
> running uac.xml replaces the A party.
>
> Depending on which of the parties you want to simulate or whether you want
> to simulate both, you need to run one or two instances of sipp and to
> choose the uas /uac behaviour for it/them.
>
> The embedded uac.xml will not send the BYE to an IP address extracted
> from any uri received in a response unless you explicitly tell it to do so
> and point it to a particular uri from which it should extract the address.
> Similarly, the embedded uas scenario will send the response to BYE to the
> same IP from which it has got the initial INVITE, even if the BYE comes
> from another one, unless you explicitly ask it to do do.
>
> Omlouvám se za stručnost, píšu z mobilu.
>
> Pavel Šindelka
>
> Dne 8. 11. 2017 4:49 odpoledne napsal uživatel Marco Menozzi <
> mmenozz...@gmail.com>:
>
> Hi
>
> thanks for your feedback.
>
> the purpose is to reproduce a situation where
>
> A calls B
>
> B answer to A without Contact Header and with Record Route set.
>
> My questions is: would it be enough to use uas.xml script to reproduce the
> above or I need to also trigger a uac.xml too ?
>
> Marco
>
> 2017-11-08 16:29 GMT+01:00 Šindelka Pavel <sinde...@ttc.cz>:
>
> Can you be more specific regarding for which of the following steps you
> need assistance?
>
> 1) run the sipp binary with a single command line parameter -sd uas ,
> thus asking it to dump the embedded uas.xml to stdout while redirecting
> stdout to file my_uas.xml:
>
> sipp -sd uas > my_uas.xml
>
> 2) edit my_uas.xml the required way (remove Contact:.., add
> Record-Route:...)
>
> 3) run sipp with all the command line parameters you use normally plus -sf
> my_uas.xml , thus telling it to run your modified UAS scenario rather
> than the embedded one
>
> ?
> P.
>
> Dne 7.11.2017 v 13:15 Marco Menozzi napsal(a):
>
> Hi
>
> sorry but I'm pretty new with scripting with this tool.
>
> I would need to reproduce a scenario where sipp is used to answer a phone
> call, removing Contact Header and adding a Record Route field with option
> "lr" (loose routing).
>
> A calls B (sipp) . B answers with 180 ringing without Contact Header and
> adding Record Route .
>
> I thought to manipulate uas.xml script to perform that but I don't know
> how to perform the action above.
>
> thanks
>
> cheers
> Marco
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
>
> _______________________________________________
> Sipp-users mailing
> listSipp-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/sipp-users
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Sipp-users mailing list
> Sipp-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/sipp-users
>
>
>
>
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Sipp-users mailing list
Sipp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sipp-users
