I had the idea of having a similar scenario some time ago. I found time to look for it and tested it in version 3.6.0 and it works (it just doesn’t unregisters the calling subscriber).
I run it with sudo sipp -sf ims/regInvCancel.xml -i source-ip-address -inf csv/csvfile.csv remote-address:remote-port -m 1 The csv file has a line (may have more) like: +351123456789;[authentication username=+351123456789 password=somepassword];somefqdn.com;3600;+351987654321;+351299999999; +351123456789 – Subscriber to register and originate call [authentication username=+351123456789 password=somepassword – Authentication user and password somefqdn.com – subscriber realm 3600: time to use for register duration ;+351987654321 . Number to call Just one note. If call is not answered send BYE is not the right option. A CANCEL request shall be used instead. Best regards; [cid:image001.png@01D601D7.58F388C0]<http://altice.pt/> Alberto Valente DEO/EFV - Core Network and Service platforms Engineering +351 963288480 / +351 215000290 alberto.r.vale...@telecom.pt<mailto:alberto.r.vale...@telecom.pt> Rua Tomás Ribeiro Nº2 1050-229 LISBOA altice.pt<http://altice.pt> [facebook]<https://www.facebook.com/alticeportugal>[linkedin]<https://www.linkedin.com/company/altice-portugal/>[twitter]<http://twitter.com/altice_portugal>[sapovideos]<http://videos.sapo.pt/alticeportugal>[youtube]<http://www.youtube.com/alticeportugal> AVISO DE CONFIDENCIALIDADE Esta mensagem e quaisquer ficheiros anexos a ela contêm informação confidencial, propriedade da Altice Portugal e/ou das demais sociedades que com ela se encontrem em relação de domínio, Fundação Altice Portugal e ACS, destinando-se ao uso exclusivo do destinatário. Se não for o destinatário pretendido, não deve usar, distribuir, imprimir ou copiar este e-mail. Se recebeu esta mensagem por engano, por favor informe o emissor e elimine-a imediatamente. Obrigado From: Šindelka Pavel [mailto:sinde...@ttc.cz] Sent: terça-feira, 24 de março de 2020 07:24 To: sshark wsk <sshark...@gmail.com> Cc: sipp-users@lists.sourceforge.net Subject: Re: [Sipp-users] ontimeout label does not work - sipp 3.6 Please post the complete scenario. I'll run it using an older SIPp version on which my own scenarios with ontimeout work properly. P. Dne 24.03.2020 v 0:46 sshark wsk napsal(a): Hi Pavel, Thanks for your email 1. I am trying this flag for the first time. I have not tried it with earlier SIPp versions. I just provided what version I am testing on as I saw some threads showing that older versions do not support this functionality. 2. I tried with optional recv lines removed, still same. It timeout but it is treated as failed rather than jumping to de-register sequence. 3. I have entire scenario in one file (reg, invite/answer, dereg) and using the same call_id. I can see the registration & call setup progresses until 180 BR, sshark On Tue, Mar 24, 2020 at 2:37 AM Šindelka Pavel <sinde...@ttc.cz<mailto:sinde...@ttc.cz>> wrote: Hi Sshark, 1. you've indicated a particular version of SIPp; have you done that because your scenario did work in previous versions and with this one it stopped, or did you just want to provide as much information as possible but you actually haven't tried this particular scenario with any previous SIPp version? 2. I remember I had some trouble to make ontimeout work in one of the older releases (and I haven't changed the scenarios since, so don't read it as "and it worked flawlessly in the never ones"), but I cannot remember the details (except that even with the ontimeout handling defined next to the timeout specification, a call where a timeout has elapsed is always counted as a failed one which is sometimes not desirable, but you're not that far yet). So can you try without the <recv response="xxx" optional="true"> between the <send> and <recv response="200" ontimeout="do_something" ... > ? It's not a solution, it is a diagnostic step, but I'm afraid this type of setup (optional messages and one mandatory one with a timeout specified) may not have been addressed in the SIPp code. 3. I hope you don't actually send REGISTER and INVITE with the same Call-ID value, as a normal SIP stack would fail on that. This one is not related to ontimeout, it's related to how SIP itself works. Pavel Dne 23.03.2020 v 13:43 sshark wsk napsal(a): Hi Alberto, Thank you for your suggestion. I have tried with below flag. However still the it does not work <recv response="200" crlf="true" timeout="3000" ontimeout="3"> Is it possible to do some debug mode/prints to see why it does not work BR, Sshark On Mon, Mar 23, 2020 at 8:01 PM Alberto Valente <alberto-r-vale...@telecom.pt<mailto:alberto-r-vale...@telecom.pt>> wrote: I think you must use something like <recv response="200" crlf="true" timeout="xxxxxx" ontimeout="BYE_AND_DEREGISTER"> Where xxxxxx stands for the number of milliseconds you want to wait for the 200 OK Mresponse Best regards [cid:image001.png@01D601D7.58F388C0]<http://altice.pt/> Alberto Valente DEO/EFV - Core Network and Service platforms Engineering +351 963288480 / +351 215000290 alberto.r.vale...@telecom.pt<mailto:alberto.r.vale...@telecom.pt> Rua Tomás Ribeiro Nº2 1050-229 LISBOA altice.pt<http://altice.pt> [facebook]<https://www.facebook.com/alticeportugal>[linkedin]<https://www.linkedin.com/company/altice-portugal/>[twitter]<http://twitter.com/altice_portugal>[sapovideos]<http://videos.sapo.pt/alticeportugal>[youtube]<http://www.youtube.com/alticeportugal> AVISO DE CONFIDENCIALIDADE Esta mensagem e quaisquer ficheiros anexos a ela contêm informação confidencial, propriedade da Altice Portugal e/ou das demais sociedades que com ela se encontrem em relação de domínio, Fundação Altice Portugal e ACS, destinando-se ao uso exclusivo do destinatário. Se não for o destinatário pretendido, não deve usar, distribuir, imprimir ou copiar este e-mail. Se recebeu esta mensagem por engano, por favor informe o emissor e elimine-a imediatamente. Obrigado From: sshark wsk [mailto:sshark...@gmail.com<mailto:sshark...@gmail.com>] Sent: sábado, 21 de março de 2020 04:17 To: sipp-users@lists.sourceforge.net<mailto:sipp-users@lists.sourceforge.net> Subject: [Sipp-users] ontimeout label does not work - sipp 3.6 Dear Users, I have sipp version - SIPp v3.6-dev-112-g8c0e358-TLS-PCAP-RTPSTREAM I have prepared a UAC scenario where 1. User sends SIP registration 2. Gets 401/200 OK and registers 3. Sends INVITE 3. Waits for 100/180/200 4. Sends ACK 5. Pauses for 4s and sends BYE 6. De-register the user In step 3, I would like to timeout if User B does not answer (not receiving 200 OK within a certain time) with below <recv response="200" ontimeout="BYE_AND_DEREGISTER"> Unfortunately above does not work I run SIPp with below flags ./sipp 192.168.1.1 -bind_local -i 10.10.10.1 -mp 50000 -t u1 -p 5060 -recv_timeout 3200 -sf register_and_call.xml -inf USER_A.csv -m 1 -trace_msg Hope you can assist me Thank You sshark _______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net<mailto:Sipp-users@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/sipp-users _______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net<mailto:Sipp-users@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/sipp-users
regInvCancel.xml
Description: regInvCancel.xml
csvfile.csv
Description: csvfile.csv
_______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users