On Wed, 2008-10-22 at 13:47 +1000, Andrew Radke wrote: > Hi all, > > > We have moved from PSTN to ISDN using a mediatrix unit (very nice with > a good web interface and very handy online instructions). > > > The only real issue I have with it is that incoming calls are missing > a leading 0 on their caller id. As in the number 0412798593 will come > through as 412798593. While this might be strictly correct as the > number (and the mediatrix is just passing on what it has been given) > it is effectively useless since it cannot be dialed and won't match > anyone's address book entries (on the old PSTN service they were > provided with the 0). > > > Is there any functionality within SipX to add the 0 to any incoming > calls from this gateway?
As Michael said, there is not a way to change the inbound caller id. You could, however create a dial plan that would make those valid numbers to dial... then all you're left with is getting the address books updated. _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users