On Sun, 2009-02-22 at 21:10 +0100, Robert Nouwens wrote: > > Hello, > > I have a question regarding the caller ID within SipX. > I have the following setup: > > Teles Voipbox (ISDN to SIP) (with 4 seperate msn's, like, 1111111111, > 2222222222, 3333333333, 4444444444) > sipxpbx > > In Sipx i've created a sip trunk to the Teles, which works, i can dial > out, and incoming connections are also received. > > I've created 2 users, with extensions 200 and 201 > > When i want to dial out from extension 201, i want to dial out with > number 222222222 and when i dial out from extension 200 i want to > dial out from number 1111111111. > So in the user section by Caller ID i've set this up like the manual > tells so. > > I can trace the SIP protocol on the Teles and the From fields stays on > 2...@...... or 2...@..... > When i put a caller id on the trunk then the from field is changed, > when i leave everything empty on the trunk it presents the > 2...@... and 2...@... from fields again. > > I'm i doing somthing wrong?
What do you mean by "creating a SIP trunk"? The Teles is a gateway - you should just configure it as a gateway. _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users