On Wed, Feb 25, 2009 at 10:05 AM, Nikolay Kondratyev <k...@nstel.ru> wrote: > > >> > One more question: do I understand right, that sipxbridge "looks" into >> the >> > outside world via "local address:5080"? Should I "nat" >> local_address:5080 >> > into external_address:5060 on my nat/router? >> > Thanks and regards, >> > Nikolay. >> >> Depends upon your ITSP. There is a section on that configuration wiki >> page on how to configure IPTables under linux for ITSPs that can only >> signal port 5060 ( as is the case with several pre-provisioned ITSPs >> that signal your IP address directly ) >> >> Some work using REGISTER and can typically signal any port you specify >> in your contact address (which in the default case would be Port 5080 >> ) >> >> Ranga >> > Thanks, Ranga, I understand now. > And what about remote workers? Will they (being behind NAT) be able to > register on my sipx? > Rgds, > Nikolay. >
That is correct. If configured correctly, they should behave just like an other PBX phone on the LAN. Ranga > > -- M. Ranganathan _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
