>>>>>>> On 4/28/2009 at 11:52 AM, in > message <49f6ee0b0200005a00005...@mail.myitdepartment.net>, "Tony > Graziano" <tgrazi...@myitdepartment.net> wrote: On 4/28/2009 at 11:40 AM, in > message > <c5d7630b5adb7744adfebc167bc04a43615...@lonsbs-onrel01.onrelay.local>, "Gabor > Paller" <gabor.pal...@onrelay.com> wrote: > > Hi, > > > > One of our customers is interested, how to activate immediate > > forwarding. E.g. 200 is forwarded to 202 and it happens immediately, 200 > > does not ring first, only 202. Is there any way to do it with SipX 4.0? > > > > Regards, > > Gabor > > _______________________________________________ > > sipx-users mailing list > > sipx-users@list.sipfoundry.org > > List Archive: http://list.sipfoundry.org/archive/sipx-users > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > > > > > I'm not sure I completely understand your question. > > If you want 202 to ring ONLY and not even send the invite to 200, I am > doubtful there is a way to do that in either 3.10x or 4.0x. > > We have a customer who desires this, in the end we settled on a function in > Polycom to forward the calls, which essentially puts the original target in > DND for that line. We also are able to tell this works if the phone power > cycles (it remembers the setting), but the feature needs to be enabled on the > phone itself. The particular site I mention has a need to forward the calls > "on demand" to an off-site/live answering service. So in this case we created > a phanton user (line with phone) and set a permanent forward to the phone > number fo that live service), and set the callerid for the phanton line to a > number the live service expects to see so it is consistent. Then the line is > forwarded from the phone to the internal phantom user, and has not been > problematic, though I'd like it to be built into the system somehow, but not > had the time to write up why I think it's necessary yet. I'd like it > ultimately to be a IVR or DTMF function within the personal auto attendant as > a speci! > al feature. Right now, for this particular need, it does work. > > At the same time, the ideal place to do this is in your gateway. Some > gateways (Patton) can do this according to a pre-determined schedule. > > Can you be more specific what it is you are trying to achieve? > > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >
This can be done with Polycom phones... User line>Diversion>Forwarding ENABLED (push profile). At that point a new idle icon is available on the phone. You simply push it and key in the line where you want the calls to go. As far as I understand it, it is phone specific. What type of phone do you use? _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
