I haven't seen this fly through so... SipX 3.10.3 from ISO. Polycom firmware 3.1.1 and 3.1.2b (boot rom 4.1.2). Patton Smartnode Gateway (firmware 5.2 (Sept build & March build) and 5.3 (march build)).
Everything is working properly except for the following use case: A call inbound through the gateway answered on a Polycom 650 (same firmware across all Polycom phones), call is transferred (blind) to a user who is on the phone. I get brief MoH, then ringing, destination Polycom 330 sees call ringing but does not answer the call, the call should then be sent to voicemail but goes to dead air. I did a debug on the Patton and saw a 481 error returned to the gateway before going off into lala land. If the Polycom 330 is not on the phone and a call is transferred to that extension & not picked up then the call goes to VM properly. If the call is transferred directly to voicemail box (8 + ext), the voicemail play fine. If an internal caller tries to call that extension while the person is on the phone they get transferred to voicemail fine. Any clues? Thanks, Mike _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users