On Fri, 2009-06-05 at 14:14 -0400, Picher, Michael wrote: > I haven't seen this fly through so... > > SipX 3.10.3 from ISO. > Polycom firmware 3.1.1 and 3.1.2b (boot rom 4.1.2). > Patton Smartnode Gateway (firmware 5.2 (Sept build & March build) and > 5.3 (march build)). > > Everything is working properly except for the following use case: > > A call inbound through the gateway answered on a Polycom 650 (same > firmware across all Polycom phones), call is transferred (blind) to a > user who is on the phone. I get brief MoH, then ringing, destination > Polycom 330 sees call ringing but does not answer the call, the call > should then be sent to voicemail but goes to dead air. > > I did a debug on the Patton and saw a 481 error returned to the gateway > before going off into lala land. > > If the Polycom 330 is not on the phone and a call is transferred to that > extension & not picked up then the call goes to VM properly. > > If the call is transferred directly to voicemail box (8 + ext), the > voicemail play fine. > > If an internal caller tries to call that extension while the person is > on the phone they get transferred to voicemail fine. > > Any clues?
Not without a trace.... _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
