Thanks,
I attached the wireshark capture. There is only 4 messages exchanged.You can
use wordpad to open the file. After that I get a fast busy on the Cisco side.
Again, sipX-to-Cisco calls work but the other way does not work.
I could not see any domain names mentioned in the attached capture. Everything
is configured based on IP on Callmanager and SIPx and the packet exchange shows
that only IP addresses are used. However, SIPX server keeps sending this realm
and nonce value within that 407 message and I think callmanager doesnt like
that...
I thought it was related to the permissions so what I did is I unchecked all
the permission levels for my dial peer, but this time when I call sipx from
callmanager, sipx startd to send back "483 too many hops" messages. I was not
sure if that was a one step forward or a complete different problem so I left
my custom dial peer in "local" permission again.
thanks again,
Subject: RE: [sipx-users] SIP trunk between Cisco Callmanager 6 and SIPXECS
Date: Thu, 2 Jul 2009 11:30:10 +0100
From: gabor.pal...@onrelay.com
To: ardasav...@hotmail.com; sipx-users@list.sipfoundry.org
Hi,
Create a custom dial plan. The number pattern should match the numbers used on
CCM, the gateway should point to your trunk and only “Local Dialing” permission
should be required.
Regards,
Gabor
From: arda savran [mailto:ardasav...@hotmail.com]
Sent: 01 July 2009 18:03
To: sipx-users@list.sipfoundry.org
Subject: [sipx-users] SIP trunk between Cisco Callmanager 6 and SIPXECS
I built a SIP trunk between a CUCM6 and SIPXECS server in our lab.
Everything in CUCM6 regarding SIP trunk is set to non-secure standard.
I can make phone calls from the phones registered to the sipxecs server to the
phones registered to CUCM6 server.
However, when I try the the other way around, the sipxecs server sends a 407
Proxy authentication required message back to CUCM6 and the call fails. I only
hear a fast busy signal on the phone which is registered to CUCM6.
On sipxecs, I set up the trunk as unmanaged gateway.
Any ideas on how to disable this 407 proxy authentication? Or any ideas on how
to configure CUCM to respond those requests from sipxecs properly?
Thanks
Windows Live™ SkyDrive™: Get 25 GB of free online storage. Get it on your
BlackBerry or iPhone.
_________________________________________________________________
Insert movie times and more without leaving Hotmail®.
http://windowslive.com/Tutorial/Hotmail/QuickAdd?ocid=TXT_TAGLM_WL_HM_Tutorial_QuickAdd_062009
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/