Hi,
Create a custom dial plan. The number pattern should match the numbers used on CCM, the gateway should point to your trunk and only "Local Dialing" permission should be required. Regards, Gabor ________________________________ From: arda savran [mailto:ardasav...@hotmail.com] Sent: 01 July 2009 18:03 To: sipx-users@list.sipfoundry.org Subject: [sipx-users] SIP trunk between Cisco Callmanager 6 and SIPXECS I built a SIP trunk between a CUCM6 and SIPXECS server in our lab. Everything in CUCM6 regarding SIP trunk is set to non-secure standard. I can make phone calls from the phones registered to the sipxecs server to the phones registered to CUCM6 server. However, when I try the the other way around, the sipxecs server sends a 407 Proxy authentication required message back to CUCM6 and the call fails. I only hear a fast busy signal on the phone which is registered to CUCM6. On sipxecs, I set up the trunk as unmanaged gateway. Any ideas on how to disable this 407 proxy authentication? Or any ideas on how to configure CUCM to respond those requests from sipxecs properly? Thanks ________________________________ Windows Live(tm) SkyDrive(tm): Get 25 GB of free online storage. Get it on your BlackBerry or iPhone. <http://windowslive.com/online/skydrive?ocid=TXT_TAGLM_WL_SD_25GB_062009 >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
