On Sat, 2009-07-18 at 16:56 -0500, arda savran wrote: > I have been trying to cluster a couple of SIPx server. When I check > the master unit, I can see the secondary unit registered to it with > the following services up and running: > > 1)CDR HA tunnel > 2)Media Services > 3)SIP Trunking > 4)Media Relay > 5)SIP Registrar > 6)SIP Proxy > > However I can not make any calls between two SIP clients that are > registered to different SIPX services. For example I can not make > calls from a phone that is registered to Master, to a phone that is > registered to the Slave. It immediately puts me on voicemail of the > called party. When I hang up, the called party gets the message > waiting indicator. > I can reach the operator and voicemail from both phones. > > I am also experiencing the following problems: > > -Maybe this is normal but I can not use the GUI for the slave directly > anymore.
That is normal - the distributed system does not run sipXconfig, so it has no direct management interface. > -I can not see the phones that are registered to the Slave SIPX, under > the "registration page" of the GUI of the Master SIPX. I thought I > should be able to > -I tried to follow the instructions in "HA setup guide" but I can not > find some of the files mentioned in that document to be modified in my > servers. For example, I could not find a file called config.defs > under /etc/sipxpbx/ folder. That guide is obsolete with version 4. > -So far the only thing I have done is to follow the normal setup > screen of SipX (centos5 4.0.1-015823) to cluster the devices. I did > not try anything fancy yet. > -Maybe this one is normal too but when check the list of services > (through sipxproc) under the slave SIPX, the only running services are > SIPxrelay, sipxproxy, sipxbridge, callresolver-agent, sipregistrar and > freeswitch. > > Sicne this is a lab I am using the master sipx server as my DNS > server. the slave is using the first one as the DNS server. DNS > advisor tells me I am good with the DNS configuration. > > What am I missing here? any help is most appreciated.. > Thanks How did you configure your phones? It sounds like you may not have registered them correctly to the SIP domain of your cluster. Also, look in the sipregistrar log for errors relating to syncronization. _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
