On Tue, Aug 25, 2009 at 12:01 PM, Matt White<[email protected]> wrote: > We just did a Polycom deployment with 4.0.1 and had no issue with MoH. > > If using sipXbrdige, we disable MoH in sipxbrdige because we let the phones > do the reinvite. that way we have Moh both internally and externally.
You will not have MOH to cover ringing on blind transfer of bridged calls if you disable MOH on sipxbridge. You can try to enable MOH on both phones and bridge as there is now a race detection algorithm that runs in sipxbridge this support is still experimental in 4.0.1 although its been tested and should work. Do apply the patch. http://track.sipfoundry.org/secure/attachment/20745/patch8.zip ( same patch as I posted earlier ) after making sure that the bridge is stopped. Or if you wait until 4.0.2 . > > We used this firmware: > > Fimrware 3.1.3 Rev C > Bootloader 4.1.2 > >>>> On 8/25/2009 at 11:39 AM, in message >>>> <033101ca259a$4cd96f70$e68c4e...@com>, "Venkata Srinivasan" >>>> <[email protected]> wrote: > > Playing MoH from sipXecs to Polycom phones; > > I believe this is still an open issue.. Any workaround / suggestions? > > > > -SVS > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > -- M. Ranganathan _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
