Has anyone successfully integrated an audiocodes Mediant 1000 box to a SIPX 
with SAS feature?

 

I have been following the instructions on sipx.foundary but as soon as I enable 
the SAS feature with registration on Audiocodes, SIPX starts returning "407 
proxy authentication required" messages..

 

the FQDN of sipx (192.168.1.4) is sipx.lab.com....Audiocodes (10.1.1.4) is 
located in a different VLAN on the same L3 switch. I think it is sending its 
registration packets to SIPX with a URI from 10.1.1.4 instead of lab.com..I 
thougt this may be the issue.

 

When I configure my phones to register to Audiocodes' IP address (port 5080 -- 
again SAS is enabled),those registrations are never accepted by SIPX server.

 

Any ideas...I can send the snapshots...

 

Thanks,


 



_________________________________________________________________
HotmailĀ® is up to 70% faster. Now good news travels really fast. 
http://windowslive.com/online/hotmail?ocid=PID23391::T:WLMTAGL:ON:WL:en-US:WM_HYGN_faster:082009
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

Reply via email to