I'm downgrading them from 3.2.1 to 3.1.3RevC now.
Ken From: M. Ranganathan [mailto:mra...@gmail.com] Sent: Wednesday, October 21, 2009 2:29 PM To: Ken Fulmer Cc: sipx-users@list.sipfoundry.org Subject: Re: FW: [sipx-users] Best B2BUA? Polycom firmware has a bug. I posted about that earlier today. We have an external JIRA issue opened for that with polycom. Did you apply the patch that is referred to in the SIPXBridge configuration and setup page? Regards Ranga On Wed, Oct 21, 2009 at 3:20 PM, Ken Fulmer <kenful...@icstechnologysolutions.com> wrote: We can now perform call transfers but Call Hold fails for inbound calls. When the call is placed on hold, it cannot be resumed. We've tried enabling MoH on the sipxbridge and disabling it on the Polycom phones. We've also enabled MoH on the phones and disabled it on the sipxbridge. Neither way works. However, for outbound calls, Call hold / resume works fine. Ken From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Ken Fulmer Sent: Wednesday, October 21, 2009 1:34 PM To: 'M. Ranganathan' Cc: sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] Best B2BUA? Thanks for your assistance. We realized we weren't pointing to port 5080. Once we changed this from 5060 to 5080, it works. Thanks again and I hope this helps someone else down the line! Ken From: M. Ranganathan [mailto:mra...@gmail.com] Sent: Wednesday, October 21, 2009 10:46 AM To: Ken Fulmer Cc: sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] Best B2BUA? On Wed, Oct 21, 2009 at 11:41 AM, Ken Fulmer <kenful...@icstechnologysolutions.com> wrote: Anyone have a recommendation for a solid B2BUA for the sipX system? The built-in version seems to only work for outbound calls. We need a device that terminates and re-originates signaling / media in both directions. That is not the intended behaviour. Its been though a lot of changes lately because we have been conducting extensive interoperability testing. It is possible that you ran into a bug or perhaps have mis-configured something. Thanks, Ken _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ -- M. Ranganathan -- M. Ranganathan
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
