Some other things that might be useful to know:
- I can ping the phones from the sipXecs server - The ARP entry for my phone is correct on the sipXecs server - The phones and the sipXecs server are on the same subnet - no router or firewall between them From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Burden, Mike Sent: Tuesday, December 08, 2009 3:55 PM To: Sipx-users list Subject: [sipx-users] Migrating Virtual to Physical -- what did I miss? After some of the suggestions made on this list, we decided to move sipXecs to a physical server, at least temporarily to see of any of the "quirks" were VM related. I backed up the configuration of our virtual sipXecs server, installed sipXecs on a physical server (with a slight detour when the sipXecs install formatted the SAN!), configured the physical server with the same IP Address, Gateway, DNS Servers, and configured it as the DHCP server (exactly like the virtual one was), and restored the backup of my configuration. Everything I've looked at on the physical sipXecs server appears to be correct, but the phones are not registering. I can telnet to port 5060 on the sipXecs server, and it connects, to it's not a "connect to a closed port" type issue. Is this enough information for someone to point out what dumb mistake I made, or do I need to install Wireshark again? Mike Burden Lynk Systems, Inc e-mail: m...@lynk.com Phone: 616-532-4985
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/