I've seen some other people with issues on their phones that were related to the POE switch. Are these POE, and what switch are you using? Does it have enough power for all the phones you have on it?
-----Original Message----- From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Winson (Elabram) Sent: Wednesday, January 27, 2010 7:42 PM To: sipXecs users Subject: [sipx-users] G-Tek phone keep "hanging" because is my codec problem? i implement 35 unit G-Tek IP-PHone in my company, however that keep "hang" when i try hunt group or call out. for example i dial 1300 is my FD department, i try dial on and off shortly, but some of the phone still Ring, i have to turn off the power and turn on again. I just try call to local, the phone also will "hang". Is it because the codec in the phone i set wrong already? i just enable G711 uLaw only , others all disable. _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
