On Wed, Feb 24, 2010 at 10:53 PM, mkitchin.pub...@gmail.com < mkitchin.pub...@gmail.com> wrote:
> Thanks. That was right in front of my face... > It doesn't seem to have the exact desired affect though. Now, after 2 > rings, inbound calls on the PSTN line are answered and transferred to a > dial tone. Am I missing something? Is there something else I should do? > > On 2/24/2010 6:33 PM, Nathaniel Watkins wrote: > > Under protocol configuration -> Endpoint Settings -> Automatic Dialing > -> set Auto Dial Status to disable. > > > > > > -----Original Message----- > > From: sipx-users-boun...@list.sipfoundry.org [mailto: > sipx-users-boun...@list.sipfoundry.org] On Behalf Of > mkitchin.pub...@gmail.com > > Sent: Wednesday, February 24, 2010 6:19 PM > > To: sipx-users@list.sipfoundry.org > > Subject: [sipx-users] Best way to prevent Audiocodes MP114 FXO from > answering > > > > I have an Audiocodes MP 114 FXO for emergency calls only if the SIP trunk > is down. It is sharing the line with a fax machine, so I want to set it to > never answer inbound calls. It is for outbound only. I don't see a way to do > this. I have no idea what many of the terms mean (mostly because Sipx does > such a nice job configuring the device for me). I'm running firmware 5.4. > Anyone know a simple way to tell it to never answer? I didn't define any > PSTN lines, but inbound calls are still answered and sent to the operator. > I'm using Sipx 4.0.4 if that is relevant. > > > > Thanks! > > -Matthew > > _______________________________________________ > > sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: > http://list.sipfoundry.org/archive/sipx-users > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > > sipXecs IP PBX -- http://www.sipfoundry.org/ > > > > This message and any files transmitted with it are intended only for the > individual(s) or entity named. If you are not the intended individual(s) or > entity named you are hereby notified that any disclosure, copying, > distribution or reliance upon its contents is strictly prohibited. If you > have received this in error, please notify the sender, delete the original, > and destroy all copies. Email transmissions cannot be guaranteed to be > secure or error-free as information could be intercepted, corrupted, lost, > destroyed, arrive late or incomplete, or contain viruses. Garrett County > Government therefore does not accept any liability for any errors or > omissions in the contents of this message, which arise as a result of email > transmission. > > > > > > Garrett County Government, > > 203 South Fourth Street, Courthouse, Oakland, Maryland 21550 > www.garrettcounty.org > > > > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > You have to "burn" the change into the config and reboot it. Did you do that?
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
