Hi Ben and All, Could you please share with me your Cisco 7970G sip *8.5(3) *firmware?
Thanks in advance. On Sun, Mar 28, 2010 at 3:59 PM, Ben Wannan <b...@wannan.org> wrote: > Rhon, > > Are the handsets behind a NAT, ? i've had trouble with these models in that > configuration (with the sipx box on a public IP), whereas the 7940/7960's > traverse NAT's fine... > > so the 7970's can call other handsets, but they cant call the 7970, that's > new to me... > > are the 7970's loading to TFTP and using the DNS settings as per the sipx > TFTP/DNS? > > what i do for my cisco's is use a cisco router as the DHCP and specify the > TFTP option, as the handsets are at various sites and talk over a routed > adsl network back to the sipx server, i don't have any NAT issues. > > Regards, > > Ben > > On Sun, Mar 28, 2010 at 1:01 PM, Rhon <c4rdi...@gmail.com> wrote: > >> Hi Ben, >> >> I'm using sip *8.5(3) *firmware. Using Cisco 7970G phone we can establish >> an outgoing calls to the internal phones but not able to receive incoming >> calls. This is not a problem with our Polycom 650 phones. >> >> Any thoughts how we can resolve this problem? >> >> Thanks for your time! >> >> Regards >> >> >> >> On Sat, Mar 27, 2010 at 2:40 PM, Ben Wannan <b...@wannan.org> wrote: >> >>> I'm using 8.3.5 on mine, fixes the MWI bug, however has a few issues with >>> voicemail (still to debug) >>> >>> is the 7970G talking to sipx and loading a config ? I'm not sure exactly >>> where you are stuck, etc. >>> >>> Regards, >>> >>> Ben >>> >>> >>> On Sat, Mar 27, 2010 at 3:16 PM, Rhon <c4rdi...@gmail.com> wrote: >>> >>>> Hi, >>>> >>>> What firmware version did you use so I can start looking for one? >>>> >>>> Thanks >>>> >>>> >>>> On Sat, Mar 27, 2010 at 2:30 AM, gabriel <g...@bayintegrated.net> wrote: >>>> >>>>> just add your sipx server in the filed "processNodeName" on "Node Name" >>>>> and then it will work. >>>>> >>>>> it took a while for me to find a fw that doesn't have issues so good >>>>> luck with that ;) >>>>> >>>>> -gabriel >>>>> >>>>> >>>>> >>>>> On Fri, 26 Mar 2010, Rhon wrote: >>>>> >>>>> Hi, >>>>>> >>>>>> Thanks for the link. I've already seen it and will try the soonest. In >>>>>> the meantime I need a working SEP.xml file for Cisco 7970G phone. >>>>>> SipXecs is >>>>>> unable to >>>>>> load the phone by adding managed phones. >>>>>> I'm unsure why at this moment. >>>>>> >>>>>> Anyone here got this working with SipXecs-4.0.4. >>>>>> >>>>>> Thanks >>>>>> >>>>>> On Thu, Mar 25, 2010 at 7:35 PM, Scott Lawrence <xmlsc...@gmail.com> >>>>>> wrote: >>>>>> On Thu, 2010-03-25 at 12:09 +0800, Rhon wrote: >>>>>> > Also, how can we trace logs in sipxecs when establishing a >>>>>> call? We >>>>>> > cannot see what's happening in the backend. All outgoing calls >>>>>> didn't >>>>>> > get through and we don't have any idea where to look at. >>>>>> See: >>>>>> >>>>>> >>>>>> http://wiki.sipfoundry.org/display/xecsuserV4r0/Display+SIP+message+flow+using+Sipviewer >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>> >>>> _______________________________________________ >>>> sipx-users mailing list sipx-users@list.sipfoundry.org >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users >>>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >>>> sipXecs IP PBX -- http://www.sipfoundry.org/ >>>> >>> >>> >> >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/