works for me, if you need to have any specifics, im sure you can make changes, but that will work as a basic dialplan for those handsets (7941 too)
Regards, Ben On Thu, Apr 1, 2010 at 11:52 PM, Ken Fulmer < kenful...@icstechnologysolutions.com> wrote: > I’ve been wondering the same thing. Thanks for clarifying for the group. > Does the Dial Plan file need to be edited in any way? > > > > <DIALTEMPLATE> > > <TEMPLATE MATCH="*" Timeout="5" User="Phone" /> > > </DIALTEMPLATE> > > > > Thanks, > > > > Ken Fulmer > > > > > > *From:* sipx-users-boun...@list.sipfoundry.org [mailto: > sipx-users-boun...@list.sipfoundry.org] *On Behalf Of *Ben Wannan > *Sent:* Thursday, April 01, 2010 6:57 AM > *To:* Rhon > *Cc:* sipx-users@list.sipfoundry.org > *Subject:* Re: [sipx-users] [Request] Working SEP.xml for Cisco 7970G > > > > Sounds like you need a dialplan file, > > see attached, upload this as a unmanaged tftp file, also i found that > making a copy in both lowercase and uppercase worked for some older cisco > phones. > > reboot the phones, they should load the dialplan, then you should be good > to go. > > Regards, > > Ben > > On Thu, Apr 1, 2010 at 9:00 PM, Rhon <c4rdi...@gmail.com> wrote: > > Hi Gabriel, > > Once I load the latest firmware. Other than the processNodeName, are there > any other configurations which I have to consider manually changing in > SEP.xml file? In your experience? > > Thanks in advance and looking forward for your usual response! > > Best regards, > > Rhon > > On Sat, Mar 27, 2010 at 2:30 AM, gabriel <g...@bayintegrated.net> wrote: > > just add your sipx server in the filed "processNodeName" on "Node Name" and > then it will work. > > it took a while for me to find a fw that doesn't have issues so good luck > with that ;) > > -gabriel > > > > > On Fri, 26 Mar 2010, Rhon wrote: > > Hi, > > Thanks for the link. I've already seen it and will try the soonest. In the > meantime I need a working SEP.xml file for Cisco 7970G phone. SipXecs is > unable to > load the phone by adding managed phones. > I'm unsure why at this moment. > > Anyone here got this working with SipXecs-4.0.4. > > Thanks > > On Thu, Mar 25, 2010 at 7:35 PM, Scott Lawrence <xmlsc...@gmail.com> > wrote: > On Thu, 2010-03-25 at 12:09 +0800, Rhon wrote: > > Also, how can we trace logs in sipxecs when establishing a call? We > > cannot see what's happening in the backend. All outgoing calls > didn't > > get through and we don't have any idea where to look at. > See: > > > http://wiki.sipfoundry.org/display/xecsuserV4r0/Display+SIP+message+flow+using+Sipviewer > > > > > > > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > > > > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/