On Wed, Apr 7, 2010 at 9:30 PM, Tony Graziano <tgrazi...@myitdepartment.net> wrote: > I am attempting to use an ITSP (voicepulse.com). I can register and receive > inbound calls, no audio or transfer call issues. > > On outbound calls I originally would see a "407 authentication required" > message, and after changing the outbouncd caller-id to the registration > address I get a 401 message. I was able to make calls without issue on port > 5060 before adding remote users, so I know I can place calls in "some" > manner. > > Question: If I register on port 5080, they send calls to me on 5080. When I > place calls, they also go out on 5080. The ITSP says they "follow" the port > used in registration. Is this somehow incompatible with sipXbridge? Does > sipxbridge "want" to send calls on 5060 and sending on 5080 is not > supported)? (I know, 2 questions, but it's really one question). > Tony
What does the contact header on the outbound INVITE look like? It should specify port 5080 -- other wise you have a configuration problem. Ranga > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: tgrazi...@myitdepartment.net > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > Why do mathematicians always confuse Halloween and Christmas? > Because 31 Oct = 25 Dec. > > > > _______________________________________________ > sipx-users mailing list sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > -- M. Ranganathan _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
