> -----Original Message----- > From: sipx-users-boun...@list.sipfoundry.org > [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of > Abdul Mayat > Sent: Tuesday, April 20, 2010 11:57 AM > To: sipx-users@list.sipfoundry.org > Subject: Re: [sipx-users] MWI to an external system - is this > possible? > > rather than doing this over a PRI (ISDN) connection, I wanted > to try and opt for the SIP gateway route (I currently have > SipX and CUCM connected by an unmanaged gateway config. > > I have seen in sipX under user > Unified Messaging in > advanced options there is a box that allows you to enter a > number to dial for MWI if the user is external. Any ideas > what needs to go in there? > > Thanks > Abdul >
For a legacy PBX the External MWI would be the number the system needs to dial to reach the user on the PBX. For example if dialing plan routed calls to 817777 to user 7777 on the PBX then you would enter 817777 in the External MWI field. I expect your configuration will be similar to this. Dave. _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/