> On Wed, 12 May 2010, Scott Richesson wrote: > > > Yup... I had that problem intermittently. Downgrading to > SIP 3.2.2 fixed the problem. > > > > I believe this is the problem: > > http://track.sipfoundry.org/browse/XTRN-1046 > > > > My phone experiencing the problem was not a remote worker, > but it did have 3 sidecars full of BLF's. Perhaps that was > slowing down the processing enough for this problem to manifest. > > > > Scott > > > > > Thanks, I'll try downgrading the phone tonight and see what > happens. I also did figure out that the initial incoming call > will ring once, but if I call the phone again within a few > seconds it will ring properly. I have a second 550 that is > sitting behind NAT, and it is working properly. I also might > just stick this phone behind NAT as well, as a temp fix.
Sticking phones behind NATs to make them more reliable? Here is something I never expected to hear in my lifetime :) _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/