You can specify it in the forward if it needs a port specified (ie., :5060).
I've only sent out via gateway so can't answer that directly. I would normally send it via sip to gateway over ip, then the gateway would assume a user identity to send it out. That was a LONG time ago. I'm sure there's an easier way to do that. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: tgrazi...@myitdepartment.net LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: mkitchin.pub...@gmail.com <mkitchin.pub...@gmail.com> To: Tony Graziano <tgrazi...@myitdepartment.net> Cc: sipx-users@list.sipfoundry.org <sipx-users@list.sipfoundry.org> Sent: Thu May 20 20:32:31 2010 Subject: Re: [sipx-users] Implementing Asterisk + Hylafax + Avantfax withSipX Mine would be going directly to a rightfax sip compliant fax server. How does it know what port to hit it on? How do I tell sipx to allow outbound calls from rightfax to route through it? Sent via BlackBerry from T-Mobile -----Original Message----- From: Tony Graziano <tgrazi...@myitdepartment.net> Date: Thu, 20 May 2010 17:16:27 To: Matthew Kitchin (public/usenet)<mkitchin.pub...@gmail.com> Cc: Tran, Ly V.<lt...@rrtgi.com>; <sipx-users@list.sipfoundry.org>; Picher, Michael<mpic...@cmctechgroup.com> Subject: Re: [sipx-users] Implementing Asterisk + Hylafax + Avantfax withSipX from sipx nothing more is needed. whether there is an acl or trusted peer thing in asterisk is another thing. back when multitech's DID fax appliance was an FXS device, I could send to the a patton gateway via "1...@5.6.7.8) and it would then route it to the appropriate port and it would work because the patton, as a gateway, wasn;t setup to restrict the call. what * does by default might be different. On Thu, May 20, 2010 at 5:11 PM, Matthew Kitchin (public/usenet) <mkitchin.pub...@gmail.com> wrote: > From sipx to the fax server, do you have to make an unmanaged sip trunk to > connect the 2, or does the user in the format u...@1.2.3.4 provide enough > info for how to route it? I'm obviously totally ignorant in this area, > > On 5/20/2010 2:47 PM, Tony Graziano wrote: > > No. Setup the did as the alias in sipx, forward from sipx to the asterisk > fax user. For outbound, try having asterisk send through sipx... > > On Thu, May 20, 2010 at 2:42 PM, Tran, Ly V. <lt...@rrtgi.com> wrote: >> >> Thanks all for the input. I’ll take a stab at this and see if I can get >> it to work. We will not be using physical faxmodems so I’m looking at >> the >> softmodems. Can the iaxmodems work here or go with the t38modem? Like >> Mr. >> Kitchin, I understand the part about the phantom user and have done that >> successfully forwarding to an ATA for our physical fax machines but don’t >> know the setup between the hylafax and SipX pbx. We have only one trunk >> with multiple DIDs. Does one setup the asterisk part with the same trunk >> and let it register with the ITSP or is it setup to connect with SipX >> somehow? >> >> >> >> Ly Tran >> >> >> >> From: sipx-users-boun...@list.sipfoundry.org >> [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Matthew >> Kitchin >> (public/usenet) >> Sent: Wednesday, May 19, 2010 4:43 PM >> To: sipx-users@list.sipfoundry.org >> >> Subject: Re: [sipx-users] Implementing Asterisk + Hylafax + Avantfax >> withSipX >> >> >> >> I'm about to integrate a Rightfax setup with Sipx. 2 separate machines, >> but one sip trunk. My fax volume in this case is too low to warrant a >> dedicated trunk. The calls will come into sipx and be routed to the >> Rightfax >> server. I understand the part about the phantom user. I don't know how to >> setup the sip trunk between Sipx and Rightfax. Rightfax is able to handle >> t.38 and sip trunks. Can someone point me in the right direction? I don't >> want to hijack this thread, but didn't want to start another one that was >> so >> similar. >> >> On 5/19/2010 4:31 PM, Tony Graziano wrote: >> >> create a phantom user, call forward to the userid in hylafax like >> >> >> >> 1...@1.2.3.4 >> >> >> >> but i never got hylafax to work with t.38 worth a doo doo. >> >> On Wed, May 19, 2010 at 5:26 PM, Tran, Ly V. <lt...@rrtgi.com> wrote: >> >> Sorry, that's what I meant.. a separate server with asterisk + hylafax >> in an environment with an existing SipX PBX. The current ITSP does >> support T.38 faxing. I will give it a try, just need to dig some more >> in how to build it. Thanks! >> >> Ly Tran >> >> -----Original Message----- >> From: sipx-users-boun...@list.sipfoundry.org >> >> [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Tony >> Graziano >> Sent: Wednesday, May 19, 2010 4:17 PM >> To: m...@grounded.net; sipx-users@list.sipfoundry.org >> Subject: Re: [sipx-users] Implementing Asterisk + Hylafax + Avantfax >> withSipX >> >> Its a good place to be now. Separate. >> >> There is a tracker or community request to add fax via FS, which would >> detect a fax call to your extension and receive it without ringing your >> phone. I think it might be a time coming, hence keeping it separate. >> ============================ >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> Fax: 434.984.8431 >> >> Email: tgrazi...@myitdepartment.net >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> Fax: 434.984.8427 >> >> Helpdesk Contract Customers: >> http://www.myitdepartment.net/gethelp/ >> >> ----- Original Message ----- >> From: sipx-users-boun...@list.sipfoundry.org >> <sipx-users-boun...@list.sipfoundry.org> >> To: sipx-users <sipx-users@list.sipfoundry.org> >> Sent: Wed May 19 17:09:58 2010 >> Subject: Re: [sipx-users] Implementing Asterisk + Hylafax + Avantfax >> withSipXMy question would be, why? Why not just build a separate >> server and keep >> things simple? >> >> >> On Wed, 19 May 2010 16:00:20 -0500, Tran, Ly V. wrote: >> > Has anyone here installed the Hylafax fax server in a SipX >> environment? >> > We >> > have a project in need of automating the testing of faxing at >> different >> > locations and would like a standalone faxserver. This might be a dumb >> > question, but we have a single sip trunk with multiple call paths on >> the >> > SipX PBX.. can the asterisk/hylafax use the same trunk for with its >> own >> > fax >> > DIDs and bypass SipX altogether? If you have Hylafax running with >> SipX, >> > how difficult is it to implement with just the Sip Trunk and no >> physical >> > gateways? >> > >> > Ly Tran >> >>_______________________________________________ >> sipx-users mailing list sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> sipXecs IP PBX -- http://www.sipfoundry.org/ >> >> >> -- >> ====================== >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: tgrazi...@voice.myitdepartment.net >> Fax: 434.984.8431 >> >> Email: tgrazi...@myitdepartment.net >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: helpd...@voice.myitdepartment.net >> Fax: 434.984.8427 >> >> Helpdesk Contract Customers: >> http://www.myitdepartment.net/gethelp/ >> >> Why do mathematicians always confuse Halloween and Christmas? >> Because 31 Oct = 25 Dec. >> >> >> >> >> >>_______________________________________________ >> >> sipx-users mailing list sipx-users@list.sipfoundry.org >> >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> >> sipXecs IP PBX -- http://www.sipfoundry.org/ >> >> > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: tgrazi...@voice.myitdepartment.net > Fax: 434.984.8431 > > Email: tgrazi...@myitdepartment.net > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: helpd...@voice.myitdepartment.net > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > Why do mathematicians always confuse Halloween and Christmas? > Because 31 Oct = 25 Dec. > > > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: tgrazi...@voice.myitdepartment.net Fax: 434.984.8431 Email: tgrazi...@myitdepartment.net LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: helpd...@voice.myitdepartment.net Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ Why do mathematicians always confuse Halloween and Christmas? Because 31 Oct = 25 Dec. _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
