I've seen that. Go through the rpm"s one by one and ensure you have everything, some are likely nmissing. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431
Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: sipXecs users <[email protected]> Sent: Tue Jun 01 13:08:07 2010 Subject: [sipx-users] Upgrade to 4.2 Failed Rather Badly Hey folks I upgraded from 3.10.2 to the latest stable build. I did try going from 3.10.x to 4.0, but that had issues so I rolled back the snapshot and went to the latest stable. Yum failed to install the sipxsupervisor so I did a "yum install" on that but I've found some issues. Firstly, all my users are set to use the internal VM rather than ExchangeUM, but that's the least of my problems right now. My main issue is that I get the following message from sipxproc -l : Missing resource: process 'SipXrelay'. At this point I can't take calls. Sip Trunking is turned off, as are most non-essential services (ACD, IM, etc). Not sure where to start troubleshooting. Any suggestions ? Thanks Pete Pete Burgess Integrated Technical Services 919.674.0044 www.itsco.com<http://www.itsco.com> Advanced Engineering Services EMC/VMware, Microsoft, Cisco, Linux, Symantec Data Center, Business Continuity, Software and Systems Design IT Management Consulting, Enterprise LAN/WAN and Carrier Network Services _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
