Due to the really crappy copper infrastructure in my area analog phone lines have a lot of issues (mainly with echo and voice cutting out) with audiocodes gateways which is remedied by tuning the incoming and outgoing gain. If the voice gain is too high there is a lot of cutting out and echo. The side effect of going to low on the gain (in or out) is sometimes the "voice activity detector" doesn't ever realize there is someone on the other side of the line, effectively leaving the call in an early media state (the timer on the phone never starts, the call isn't "officially" connected) which eventually disconnects.
What I would like to do is disable voice activity detection altogether and have the call connected immediately and the timer started when an outbound call is made, no early media involved. I have tried playing with all sorts of settings in the Audiocodes but nothing seems to make this happen. Could anyone point me in the right direction? _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/