I've just been given the go ahead to replace one of the phone systems at one of our remotes sites. I'm debating whether to put a separate sipx server at this location or run these phones off of my main sipXecs install.
We have a shared point to point T1 circuit between the two locations (20 of the 45 users also use this circuit for internet/email/etc.). All inbound/outbound calls will route thru the PRI at our main location. Any strong feelings / recommendations one way or another? This message and any files transmitted with it are intended only for the individual(s) or entity named. If you are not the intended individual(s) or entity named you are hereby notified that any disclosure, copying, distribution or reliance upon its contents is strictly prohibited. If you have received this in error, please notify the sender, delete the original, and destroy all copies. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Garrett County Government therefore does not accept any liability for any errors or omissions in the contents of this message, which arise as a result of email transmission. Garrett County Government, 203 South Fourth Street, Courthouse, Oakland, Maryland 21550 www.garrettcounty.org _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
