Yes after much testing i believe the 3.2.2 would be my recommendation for Sipxecs 4.2.X 3.1.3 has inbound calling issues as well as zero support for LLDP. 3.2.3 is just unusable you may have luck with 3.1.3RevC as Tony points out , provided your network design is free of VLANs , QoS and LLDP.
BootRom 4.2.1 was used for my testing purposes. Mixed Network of ip450 and ip650 Warm Regards Gabrial Casey Telecommunications Franklin American Mortgage Company 501 Corporate Center Dr. Suite 400 Franklin, TN 37067 Direct:615-468- 2945 Cell: 615-852-5015 Fax: 615-628-5698 Email:gca...@franklinamerican.com From: "Massimo Vignone" <massimo.vign...@unimore.it> To: "Discussion list for users of sipXecs software" <sipx-users@list.sipfoundry.org> Sent: Tuesday, November 16, 2010 8:18:45 AM Subject: Re: [sipx-users] 1 Ring Diversions to Voicemail On 11/15/2010 07:28 PM, Gabe Casey wrote: > I am having an issue that was reported to be in Polycom Firmware 3.2.3 > * 3.2.3 Any latency over approximately 30-40 ms will will cause the call > to divert to voicemail after 1 or less rings. > I had a similar issue lately, due to the fact that Polycom phones respond with a TRYING message after 1.5 sec. I was using 3.1.3c firmware. After that I solved configuring network devices with Diffserv based QoS and upgrading from 3.1.3c to 3.2.2. because the 3.1.3c version has an issue about Diffserv. See Release Note 48996: Phone not tagging correct DSCP value to some packets (Trying,Ringing and OK). HTH, Massimo -- Massimo Vignone UniMORE - Servizi Informatici - Reti e Sistemi Phone: +39.059.2058032 Fax: +39.059.2058034 sip:massimo.vign...@unimore.it ISN:8032*881 _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/ _____________________________________________________________________ This message contains confidential information. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately if you have received this e-mail by mistake and delete this e-mail from your system. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/
