With the SPA942, the phones work great. The only issues I'm seeing right now is Shared Line Appearance not work, WIKI implies it's not supported so that is okay, and the clock doesn't display correct time - seem to display GMT, rather than local time. Need to dig into that still.
MOH, transfer, internal and external calls, Paging, Intercom, all seem to work as advertised. There are some tips for making these work in the WIKI. I didn't use them initially, and had great results. I tried them later, and had negative results. I think using those tips is not necessary, and will need to be reviewed. Once I find some more SPA942 for my lab, I'll test in a sterile environment and update the wiki. -----Original Message----- From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Gary Luca Sent: Friday, September 09, 2011 10:57 AM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] SPA502G / SPA504G not receiving inbound calls Acutally MoH works fine for internal calls. On Fri, Sep 9, 2011 at 1:20 PM, Michael Picher <mpic...@ezuce.com> wrote: > yes, expect this and MoH to not work (unless you are using a sip trunk > with sipXbridge which can inject MoH). But you will not have MoH for > internal to internal callers... > Mike > > On Fri, Sep 9, 2011 at 1:12 PM, Gary Luca <garyluc...@gmail.com> wrote: >> >> And I have a new problem. >> >> Shared Line Appearance = fail >> >> The line registers no problem but all I get is a flashing red light >> on the line key and no ability to make or receive calls on that line. >> >> And of course the Administrator's Guide is completely useless. >> >> Any ideas? >> >> >> >> On Fri, Sep 9, 2011 at 1:10 PM, Gary Luca <garyluc...@gmail.com> wrote: >> > I've BEEN configuring them manually. There is no support in sipx >> > for SPA502G or SPA504G. >> > >> > Configured to use UDP = no incoming calls >> > >> > And I haven't a clue how I would go about dumping the configuration >> > off the phone. >> > >> > >> > On Fri, Sep 9, 2011 at 12:36 PM, Douglas Hubler <dhub...@ezuce.com> >> > wrote: >> >> On Fri, Sep 9, 2011 at 12:25 PM, Gary Luca <garyluc...@gmail.com> >> >> wrote: >> >>> Just for the hell of it I tried using TCP instead of UDP for SIP >> >>> signalling. And it works no problem. >> >> >> >> Can you configure the phone manually to do UDP and get inbound >> >> calls to work? If so, can you dump the configuration somehow off >> >> the manually configured phone so we can compare? >> >> _______________________________________________ >> >> sipx-users mailing list >> >> sipx-users@list.sipfoundry.org >> >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >> >> > >> > >> > >> > -- >> > Gary J. Luca Jr. >> > >> > 781-333-8087 >> > http://www.linkedin.com/in/garylukes >> > >> >> >> >> -- >> Gary J. Luca Jr. >> >> 781-333-8087 >> http://www.linkedin.com/in/garylukes >> _______________________________________________ >> sipx-users mailing list >> sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > -- > Michael Picher > eZuce > Director of Technical Services > O.978-296-1005 X2015 > M.207-956-0262 > @mpicher <http://twitter.com/mpicher> > www.ezuce.com > > > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Gary J. Luca Jr. 781-333-8087 http://www.linkedin.com/in/garylukes _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/ ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1392 / Virus Database: 1520/3886 - Release Date: 09/09/11 _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/
