I guess when they finally stop having to do a weeks worth of programming each time I ask for something, they will be nicely reliable :).
I look forward to that and will also ask them why this is happening so much at this point. On Sat, 11 Feb 2012 16:21:17 -0500, Tony Graziano wrote: > I have had no issue having them send to me on port 5080 using either method. > > I also can use their t.38 trunks to receive faxes in sipx or send from an > fxs port using t.38. > On Feb 11, 2012 4:16 PM, "m...@grounded.net" <m...@grounded.net> wrote: > >> The quality on the device which now works is great, the call setup time >> is the fastest we've seen for ITSP's. > I like their tech support so far and can't say anything bad about them. > Just wondered about the problems we've had, if others were experiencing the > same things. > > I thought folks had recommended not to port forward 5060 to 5080 though? I > can easily do that but thought it would be much better if we didn't have to > when installing. > > Most of what I'm looking to do with them would be IP auth instead of having > each channel authenticating separately. > > Mike > > > On Sat, 11 Feb 2012 15:34:43 -0500, Matt White wrote: >> They are the sole provider we resell. They merged with voxitas about 2 >> years ago. >> >> We probably have several dozen accounts with appia. Haven't had any >> issues >> with functionaility. >> >> they have two platforms. One with register that picks up on port 5080 >> automatically. >> >> The other platform is IP based, but we always use a firewall port forward >> for the 5060 to 5080 translation. We actually prefer the IP based >> platform. But both work very well. We just get better ping times from >> the >> IP based datacenters. >> >> -m >> >>>>> "m...@grounded.net" <m...@grounded.net> 02/10/12 5:20 PM >>> >> Is anyone on the list using appia? >> >> They don't yet have a GUI but talk about it being done soon. >> Just changing ports takes having to communicate with support. >> >> So far, every time we come to test something, we're told they need to >> program that functionality in. We were trying to test a sip to analog >> gateway to use with pbx's but nothing worked. They found some problems >> which took a week to resolve saying that they didn't cover that >> functionality. >> >> Now with sipx, they can't send to me on port 5080 yet I thought someone >> here mentioned using them and they work fine. >> >> The support person is wonderful to work with but it's going on three weeks >> I believe now since we contacted them and have been trying to test. >> >> Just wondering. >> >> _______________________________________________ >> sipx-users mailing list >> sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: helpd...@voice.myitdepartment.net > > > Helpdesk Customers: http://myhelp.myitdepartment.net > Blog: http://blog.myitdepartment.net _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/