---------- Forwarded message ----------
From: "Bryan Anderson" <shadow...@gmail.com>
Date: May 5, 2012 3:37 PM
Subject: Re: [sipx-users] Patton Config from wiki
To: "Discussion list for users of sipXecs software" <
sipx-users@list.sipfoundry.org>

Ok, so I have the latest 6.1 on.  I have attached my configuration.  Out
going is working but not incoming.  The gateway is not answering the calls.


-Bryan Anderson




On Sat, May 5, 2012 at 4:23 AM, Tony Graziano
<tgrazi...@myitdepartment.net>wrote:

> You should put the latest version 6.1 on it.
> On May 5, 2012 1:31 AM, "Bryan Anderson" <branderso...@msn.com> wrote:
>
>> R5.2
>>
>> I had gotten it to where some times it would call out.  Now I dial the
>> number, get a dial tone, then silence, then dial tone, then busy tone.
>>
>> -Bryan Anderson
>>
>>
>>
>>
>> On Fri, May 4, 2012 at 7:05 PM, Tony Graziano <
>> tgrazi...@myitdepartment.net> wrote:
>>
>>> What firmware version?
>>> On May 4, 2012 5:50 PM, "Bryan Anderson" <branderso...@msn.com> wrote:
>>>
>>>> I have just received our two new Patton SN5420 4 FXO gateways.  I
>>>> pulled down the tested config from here:
>>>> http://wiki.sipfoundry.org/display/sipXecs/Patton+4524+-+TESTED
>>>>
>>>> set the variables mentioned at the top of the page and removed the two
>>>> FXS port listing at the bottom of the config.  Now I am getting boot errors
>>>> on reading the following four lines of the config.  Please advise.
>>>>
>>>> context cs switch
>>>>
>>>> profile ringing-cadence default
>>>> play 1 1000
>>>> pause 2 4000
>>>>
>>>>
>>>>
>>>> -Bryan Anderson
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> sipx-users mailing list
>>>> sipx-users@list.sipfoundry.org
>>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>>>
>>>
>>> LAN/Telephony/Security and Control Systems Helpdesk:
>>> Telephone: 434.984.8426
>>> sip: helpdesk@voice.myitdepartment.**net<helpd...@voice.myitdepartment.net>
>>>
>>> Helpdesk Customers: 
>>> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net>
>>> Blog: http://blog.myitdepartment.net
>>>
>>> _______________________________________________
>>> sipx-users mailing list
>>> sipx-users@list.sipfoundry.org
>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>>
>>
>>
>> _______________________________________________
>> sipx-users mailing list
>> sipx-users@list.sipfoundry.org
>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>
>
> LAN/Telephony/Security and Control Systems Helpdesk:
> Telephone: 434.984.8426
> sip: helpdesk@voice.myitdepartment.**net<helpd...@voice.myitdepartment.net>
>
> Helpdesk Customers: 
> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net>
> Blog: http://blog.myitdepartment.net
>
> _______________________________________________
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>

Attachment: patton-sipx2
Description: Binary data

_______________________________________________
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Reply via email to