I am currently working with a Digium gateway that runs on Asterisk with the same symptoms. For call transfer, I was able to create a route on the gateway to take any extension number in my dial plan and send it back out to the Sipxecs system. I have not been able to overcome the Park issue.
Richard Bruce Dimensional Communications 7915 S. Emerson Ave, Suite 131 Indianapolis, IN 46237 (317) 215-4199- office (317) 946-1899 - cell -----Original Message----- From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Chris Parker Sent: Tuesday, November 06, 2012 2:40 PM To: sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] Cannot Xfer Calls Received from Unmanaged Trunks The call volume is going to be very low. If I understand this correctly, I would create a trunk under Gateways in sipX for my Asterisk system and create the other end in Asterisk accordingly, rather than calling it an Unmanaged Gateway. And to answer another question, yes the sipX and Asterisk system are on the same subnet whereas CUCM is in a different subnet but has unrestricted access to that subnet. On Nov 6, 2012, at 12:00 PM, sipx-users-requ...@list.sipfoundry.org wrote: > An unmanaged gateway is just that. Can I assume that the address for both systems are on the same subnet? Unmanaged gateways would assume that the other and knows how to handle the SIP REFER method. > > Asterisk as a sip trunking system is not exactly compliant. > > If REFER is not supported, then the media needs to be anchored by sipx once it accepts the call and hold the REFER internally, at which point you would setup a manual sip TRUNK not a gateway. > _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/
