When using a SIP trunk you will need to have Asterisk point to port 5080.
On Tue, Nov 6, 2012 at 10:25 PM, Chris Parker <cparke...@me.com> wrote: > Some development on this topic... > Watching the SIP debug in Asterisk, I see that when I try to transfer the > call it actually asks Asterisk to dial the target extension and Asterisk > has no clue how to deal with that since it owns the 1xxx group while sipX > owns 2xxx. If I put in a line that says to send _20xx back to sipX it > works! Although due to how hacky this is, calls sent to Park are lost > forever and all transfers are blind. At least this is progress in a way. > I tried to create a SIP trunk between Asterisk and sipX but it was sort of > wonky; it couldn't call back into Asterisk to reach the 1xxx and the calls > sent over from Asterisk still exhibited the same broken transfer - long > story short I tried and failed somehow at SIP trunk, so it's back to an > unmanaged gateway. > > > On Nov 6, 2012, at 2:40 PM, Chris Parker <cparke...@me.com> wrote: > > > The call volume is going to be very low. If I understand this correctly, > I would create a trunk under Gateways in sipX for my Asterisk system and > create the other end in Asterisk accordingly, rather than calling it an > Unmanaged Gateway. > > And to answer another question, yes the sipX and Asterisk system are on > the same subnet whereas CUCM is in a different subnet but has unrestricted > access to that subnet. > > > > On Nov 6, 2012, at 12:00 PM, sipx-users-request@list.sipfoundry.orgwrote: > > > >> An unmanaged gateway is just that. Can I assume that the address for > both systems are on the same subnet? Unmanaged gateways would assume that > the other and knows how to handle the SIP REFER method. > >> > >> Asterisk as a sip trunking system is not exactly compliant. > >> > >> If REFER is not supported, then the media needs to be anchored by sipx > once it accepts the call and hold the REFER internally, at which point you > would setup a manual sip TRUNK not a gateway. > >> > > > > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Josh Patten eZuce Solutions Architect O.978-296-1005 X2050 M.979-574-5699 http://www.ezuce.com
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/
