Think about what you're doing...  83 conversations instantly out of the
box...

We only recommend 12 to 13...  maybe a few more on faster computers.

The system can't get all the sip messages out fast enough.

Get thee to a proper paging solution from Valcom...  Or snom has a little
paging gateway...

Mike


On Fri, Nov 30, 2012 at 11:38 AM, Bryan Anderson <[email protected]>wrote:

> Hello,
>
> We have an office of ~83 endpoints  all but one phone are Polycom
> SoundPoint IP 331's, the receptions uses a 650 with 1 sidecar.
>
> The firmware's are currently as shipped with a mix of firmwares 3.2.4 and
> 3.3.0 (please lets avoid the downgrade if we can, both version are having
> this issue).
>
> Every thing worked fine except paging.  Which in this office is a big
> thing.  The problem is some pages worked and some didn't.  The pages that
> didn't what happened is a large group of the phones would start to receive
> the page with the notification tone, then just stop even though the page
> was still in progress.  The phones this occurred on changed with each of
> the pages that failed.  I am at a loss for identifying the problem due to
> the inconsistency of the failures.
>
>
> My Questions are:
>
> 1) Has anyone else experience this and been able to resolve it,
>
> 2) Does any one else do a High volume of pages (30-50/day) and have this
> working.  If so, what equipment and sipx version are you using?
>
> 3) If it really is the 3.3.0 that's causing my problems, can it be
> downgraded without touching all of the 30 or so phones one by one?
>
> We still have SipXecs in place but are still using the old key system tell
> this is working.
>
>
> Thanks,
> Bryan Anderson
>
>
>
>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>



-- 
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square****

Suite 201****

Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher <http://twitter.com/mpicher>
linkedin <http://www.linkedin.com/profile/view?id=35504760&trk=tab_pro>
www.ezuce.com

------------------------------------------------------------------------------------------------------------
"The best way to predict the future is to invent it." - Alan Kay
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Reply via email to