Hello,
Yes, I have tested it many times. And with different vocoders as well (you can
also try with speex, ILBC, etc). You said wxCommunicator worked well, so why
don't you try Jaro's experimental sipXtapi branch. He has also provided
prebuilt binaries of sipXtapi on sourceforge.
My environment over here is Brekeke OnDO SIP server/3CXPhoneSystem.
Thanks.
Best Regards,
Hitesh
----- Original Message -----
From: [EMAIL PROTECTED]
To: sipxtapi-devlist.sip...
Sent: Tuesday, June 19, 2007 8:45 AM
Subject: Re: [sipxtapi-dev] Another softphone base d on sipXtapi
Hi Hitesh:
I have rebuilt sipXtapi project under MSVC++8 environment. But audio crash
still occured. The following are my testing steps (I will give you my questions
bellow):
(1) Install sipXezphone on two PC hosts.
(2) sipXezphone A calls B through OpenSER sip server.
(3) A talks to B for about at least 5 seconds.
(4) B disconnects the call.
(5) Repeat step 2 to 4 for 10 times.
I have made a 3 groups of tests (30 times total), the audio crash occured at
A side nearly at the 4th or 5th call test in each group.
Well, my questions are:
(1) Did you really test the phone's communication like the above processes?
(2) Could you please tell me your testing environment?
Thank you very much for your help.
Best, Feng XueSong
-------------------------------------------------------------------
[EMAIL PROTECTED] 写道：
Hi.
A very stange problem!
My developing environment is .Net 2003. I will try VC++8 these days. And I
will try to use wxcommunicator's sipXtapi.
By the way, I have tested wxCommunicator and the audio crash did not occur
again.
wxCommunicator is able to cancel a all if it is in ringing state. It sends
a 403 Forbidden response to cancel the call.
Thank you for your informaiton.
Best Regards,
Feng XueSong
在2007-06-15，"logan" <[EMAIL PROTECTED]> 写道：
Hello,
I'm not able to produce the problem at my end. I tried all different
vocoders and it works ok.
There is however a problem where sipxCallDestroy returns failure and you
are not able to end a reject a call while it's in ringing state. I will try to
fix it later.
Thanks.
Regards,
Hitesh
----- Original Message -----
From: [EMAIL PROTECTED]
To: [email protected]
Sent: Friday, June 15, 2007 6:47 AM
Subject: Re: [sipxtapi-dev] Another softphone base d on sipXtapi
Hi, Hitesh:
Thank you for your information.
The audio crash I mean here is that crashing sound in audio. I have
tried in following modes in our LAN.
(1) sipXezphone to sipXezphone
(2) MyDelphiPhone to MyDelphiPhone
(3) sipXezphone to SJPhone
(4) CrossTalk to CrossTalk
(5) CrossTalk to sipXezphone
(6) CrossTalk to SJPhone
Audio crash will occur in all of above tests. I don't know if you've
found the issue in your environment.
I will try wxcommunicator you recommanded.
Thank you very much.
Best Regards,
Feng XueSong
在2007-06-14，"logan" <[EMAIL PROTECTED]> 写道：
Hi,
Thanks for your kind remarks.
What do you mean by audio crash? Do you mean crashing sound in audio
or the application crashes? For the latter you may try with some other vocoder.
Yeah, at times call coudn't be canceled. I will try and see if I can
fix it.
Conference may give problems, Jaroslav has made some patches for it
(don't know if they have been merged with the sipXtapi main branch), you may
apply them and then try.
sipXtapi doesn't have video support at this moment of time.
There is another very good softphone based on sipXtapi -
http://sourceforge.net/projects/wxcommunicator. You may try that as well.
Thanks.
Best Regards,
Hitesh
----- Original Message -----
From: [EMAIL PROTECTED]
To: [email protected]
Sent: Thursday, June 14, 2007 2:23 PM
Subject: Re: [sipxtapi-dev] Another softphone base d on sipXtapi
Hi Mr.Hitesh:
I have tested your phone. GUI is beautiful. But there are sill
some issues existing which I have ever met in my phone (developed by Delphi). I
will list them as follows (Sorry for not giving you some good advice required
by your mail):
(1) The most important issue I think is that audio crash exists. I
used SJPhone as another peer, at the second time when CrossTalk connecting to
SJPhone, audio crash occured at SJPhone side. If using CrossTalk to CrossTalk
mode, the audio crash would occur as well.
Please refer to my issue published on 2007-6-12,
TITLE:[sipxtapi-dev] About crash of sipXezphone (sipXtapi)
(2) If using CrossTalk as callee, CrossTalk could not cancel the
call when ringing. It is because that sipXtapi doesnot provide this function. I
hope someone could improve this function. I am trying but need some time.
(3) I didnot test conference function. Have you ever tested it? I
think it need a conference server.
(4) I didnot find video service. Are you going to provide it in
near future?
Thank you very much for your work. I'd like to exchange idears with
you.
Best, Feng XueSong
(Beijing, China)
在2007-06-13，"logan" <[EMAIL PROTECTED]> 写道：
Hello,
Here is a softphone I did as my college project -
http://sourceforge.net/projects/crosstalk/. It's a MFC project and the build
environment is VC++ 7.1.
Please pardon me for my poor coding styles and habits. I will be
very happy if someone finds it useful.
Thanks.
Best Regards,
Hitesh
------------------------------------------------------------------------
一 起 来，150 万 人 同 时 在 玩 的 梦 幻 西 游
------------------------------------------------------------------------
_______________________________________________
sipxtapi-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipxtapi-dev/
----------------------------------------------------------------------------
劲 爆 150 万 同 时 在 线，众 人 追 捧 梦 幻 西 游
------------------------------------------------------------------------------
人 山 人 海 盛 景，尽 在 梦 幻 西 游
------------------------------------------------------------------------------
_______________________________________________
sipxtapi-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipxtapi-dev/_______________________________________________
sipxtapi-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipxtapi-dev/
