On Fri, Jul 18, 2003 at 11:30:20AM +0200, Bas van der Vlies wrote:
> For IA64 systems the first boot device is the network card and
> i want to acomplish the same as with the IA32 system. I can
> install the system, but is there also an elilo.conf default
> configuration that tells to boot from the local disk, just like
> the local.cfg for PXELINUX:
> default harddisk
> label harddisk
> localboot 0
>
> With the PXELINUX setup you do not have to know what kind of hardisk
> or kernel you want to run.
i'm not aware of such an option for elilo. however, i believe you can
just configure your net-retrieved elilo.efi to boot your on disk config
also, and just change the default. i haven't tested this - but the README
for elilo leads me to believe this is possible.
for example:
default=disk
image=fs0:\efi\debian\vmlinuz
label=disk
root=/dev/md3
append="console=ttyS0,115200n8"
image=kernel
label=net
initrd=initrd.img
root=/dev/ram
append="console=ttyS0,115200n8"
-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
_______________________________________________
Sisuite-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/sisuite-users