yes, I use it since 3 weeks now. try to go in the yourimage.master script and before mkswap mount your volume
Franck ----- Original Message ----- From: Jeffrey Strope To: sisuite-users@lists.sourceforge.net Sent: Sunday, April 05, 2009 2:22 PM Subject: Re: [sisuite-users] autoinstall from iso fails with disk error I upgraded to 4.1.6 and still get the same error, unfortunately. Does System Imager support RAID 1 configurations? Best, Jeff From: Infos E-Blokos [mailto:in...@e-blokos.com] Sent: Friday, April 03, 2009 7:39 PM To: sisuite-users@lists.sourceforge.net Subject: Re: [sisuite-users] autoinstall from iso fails with disk error I'm not an expert of systemimager but try to mount it before or use 4.1.6 version maybe will resolve the problem Franck ----- Original Message ----- From: Jeffrey Strope To: sisuite-us...@lists.sf.net Sent: Friday, April 03, 2009 6:56 PM Subject: [sisuite-users] autoinstall from iso fails with disk error I have a number of identical boxes that I'm attempting to clone using SystemImager. I've installed Ubuntu 8.10 on the golden client and stored the image from that machine on my server. I've then created a boot cd using 'si_mkautoinstallcd -append "IMAGESERVER=192.168.2.229 IMAGENAME=appliance" --out-file /tmp/iHRIS.iso' which I've loaded onto a cd and successfully booted from on one of the clients. However, I get the following error when the client attempts to do the autoinstall: . mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05: No such file or directory Killing off running processes. . Your autoinstall has failed . Here is the /etc/fstab from the golden client which is running on 2 80GB SATA drives in a RAID1 configuration: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # /dev/mapper/isw_ebcbaceghc_Volume01 UUID=31481579-4f75-4451-930e-f0da6a8e7cfb / ext3 defaults,errors=remount-ro 0 1 # /dev/mapper/isw_ebcbaceghc_Volume05 UUID=51e3e45e-13db-4102-a479-4abcf8ca2ee4 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 Any ideas what I'm doing wrong? Best, Jeff Strope -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ---------------------------------------------------------------------------- ------------------------------------------------------------------------------ ---------------------------------------------------------------------------- _______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ _______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
------------------------------------------------------------------------------
_______________________________________________ sisuite-users mailing list sisuite-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sisuite-users
