weird, if the script can mount other partition there is no reason that it can't 
mount this one.
is it ext3 ?
  ----- Original Message ----- 
  From: Jeffrey Strope 
  To: sisuite-users@lists.sourceforge.net 
  Sent: Monday, April 06, 2009 10:05 AM
  Subject: Re: [sisuite-users] autoinstall from iso fails with disk error


  Doing that gives me:

   

  "mount: mount point /dev/mapper/isw_ebcbaceghc_Volume05 does not exist"

   

  Best,

   

  Jeff

   

  From: Infos E-Blokos [mailto:in...@e-blokos.com] 
  Sent: Sunday, April 05, 2009 7:54 PM
  To: sisuite-users@lists.sourceforge.net
  Subject: Re: [sisuite-users] autoinstall from iso fails with disk error

   

  before the command line mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05

  put "mount /dev/sdX /dev/mapper/isw_ebcbaceghc_Volume05"

   

  Franck

    ----- Original Message ----- 

    From: Jeffrey Strope 

    To: sisuite-users@lists.sourceforge.net 

    Sent: Sunday, April 05, 2009 4:30 PM

    Subject: Re: [sisuite-users] autoinstall from iso fails with disk error

     

    I've tried that, but might be missing something. Here's the portion of my 
image.master script that fails:

     

    logmsg "mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05 || shellout"

    mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05 || shellout

    logmsg "swapon /dev/mapper/isw_ebcbaceghc_Volume05 || shellout"

    swapon /dev/mapper/isw_ebcbaceghc_Volume05 || shellout

     

    When I'm at the busybox prompt, and do an "ls -la /dev/mapper/" all I see 
is a file named "control".

     

    What should I mount before this executes?

     

    Best,

     

    Jeff

     

     

    From: Infos E-Blokos [mailto:in...@e-blokos.com] 
    Sent: Sunday, April 05, 2009 2:43 PM
    To: sisuite-users@lists.sourceforge.net
    Subject: Re: [sisuite-users] autoinstall from iso fails with disk error

     

    yes, I use it since 3 weeks now.

    try to go in the yourimage.master script

    and before mkswap mount your volume

     

    Franck

      ----- Original Message ----- 

      From: Jeffrey Strope 

      To: sisuite-users@lists.sourceforge.net 

      Sent: Sunday, April 05, 2009 2:22 PM

      Subject: Re: [sisuite-users] autoinstall from iso fails with disk error

       

      I upgraded to 4.1.6 and still get the same error, unfortunately.

       

      Does System Imager support RAID 1 configurations?

       

      Best,

       

      Jeff

       

       

      From: Infos E-Blokos [mailto:in...@e-blokos.com] 
      Sent: Friday, April 03, 2009 7:39 PM
      To: sisuite-users@lists.sourceforge.net
      Subject: Re: [sisuite-users] autoinstall from iso fails with disk error

       

      I'm not an expert of systemimager but

      try to mount it before or use

      4.1.6 version maybe will resolve the problem

       

      Franck

        ----- Original Message ----- 

        From: Jeffrey Strope 

        To: sisuite-us...@lists.sf.net 

        Sent: Friday, April 03, 2009 6:56 PM

        Subject: [sisuite-users] autoinstall from iso fails with disk error

         

        I have a number of identical boxes that I'm attempting to clone using 
SystemImager. I've installed Ubuntu 8.10 on the golden client and stored the 
image from that machine on my server. I've then created a boot cd using 
'si_mkautoinstallcd -append "IMAGESERVER=192.168.2.229 IMAGENAME=appliance" 
--out-file /tmp/iHRIS.iso' which I've loaded onto a cd and successfully booted 
from on one of the clients. However, I get the following error when the client 
attempts to do the autoinstall:

         

        .

        mkswap -v1 /dev/mapper/isw_ebcbaceghc_Volume05: No such file or 
directory

        Killing off running processes.

        .

        Your autoinstall has failed

        . 

         

        Here is the /etc/fstab from the golden client which is running on 2 
80GB SATA drives in a RAID1 configuration:

         

        # /etc/fstab: static file system information.

        #

        # <file system> <mount point>   <type>  <options>       <dump>  <pass>

        proc            /proc           proc    defaults        0       0

        # /dev/mapper/isw_ebcbaceghc_Volume01

        UUID=31481579-4f75-4451-930e-f0da6a8e7cfb /               ext3    
defaults,errors=remount-ro 0       1

        # /dev/mapper/isw_ebcbaceghc_Volume05

        UUID=51e3e45e-13db-4102-a479-4abcf8ca2ee4 none            swap    sw    
          0       0

        /dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0     
  0

         

        Any ideas what I'm doing wrong?

         

        Best,

         

        Jeff Strope


        -- 
        This message has been scanned for viruses and 
        dangerous content by MailScanner, and is 
        believed to be clean. 


------------------------------------------------------------------------

        
------------------------------------------------------------------------------


------------------------------------------------------------------------

        _______________________________________________
        sisuite-users mailing list
        sisuite-users@lists.sourceforge.net
        https://lists.sourceforge.net/lists/listinfo/sisuite-users

         

         

         


      -- 
      This message has been scanned for viruses and 
      dangerous content by MailScanner, and is 
      believed to be clean. 


      -- 
      This message has been scanned for viruses and 
      dangerous content by MailScanner, and is 
      believed to be clean. 


--------------------------------------------------------------------------

      
------------------------------------------------------------------------------


--------------------------------------------------------------------------

      _______________________________________________
      sisuite-users mailing list
      sisuite-users@lists.sourceforge.net
      https://lists.sourceforge.net/lists/listinfo/sisuite-users


    -- 
    This message has been scanned for viruses and 
    dangerous content by MailScanner, and is 
    believed to be clean. 


    -- 
    This message has been scanned for viruses and 
    dangerous content by MailScanner, and is 
    believed to be clean. 


----------------------------------------------------------------------------

    
------------------------------------------------------------------------------


----------------------------------------------------------------------------

    _______________________________________________
    sisuite-users mailing list
    sisuite-users@lists.sourceforge.net
    https://lists.sourceforge.net/lists/listinfo/sisuite-users


  -- 
  This message has been scanned for viruses and 
  dangerous content by MailScanner, and is 
  believed to be clean. 


  -- 
  This message has been scanned for viruses and 
  dangerous content by MailScanner, and is 
  believed to be clean. 


------------------------------------------------------------------------------


  ------------------------------------------------------------------------------



------------------------------------------------------------------------------


  _______________________________________________
  sisuite-users mailing list
  sisuite-users@lists.sourceforge.net
  https://lists.sourceforge.net/lists/listinfo/sisuite-users

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

------------------------------------------------------------------------------
_______________________________________________
sisuite-users mailing list
sisuite-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sisuite-users

Reply via email to