Hi Ceel - sorry I was thinking about to give you instructions, but it was already to late...
about chipset - System -> System Information -> Processor whats written there and about the driver... please lets just test the pure iso, without using tazx and installing the intel driver - I have uploaded a new iso where I included libdrm-intel https://dl.dropboxusercontent.com/u/92249974/slitaz-test-3.2.50-04092013.iso so please boot this iso and test if something changes if not - please log in as tux -> slim -> startx and look in /var/log/Xorg.0.log if the fbdev driver is used you see this around line 120 - it unloads either vesa or fbdev - it should unload vesa and use fbdev and please nothing else than this..... Thomas Am Tue, 3 Sep 2013 00:58:14 +0200 (CEST) schrieb ceel <[email protected]>: > I don't know what happened. I was posting my answer, the system > hanged nearly 30 seconds and then came back to forum home page and > all the topics were signed by a certain Anonymous :-\ Not good isn't > it? Well I was saying: This becomes a little too much technical for > me. I'm a common user you know, sorcerers apprentice at spare time > but I don't still have my license. Tell me how I can obtain these > information and I'll do it. What I can say is tazx ended with this > message: > > (==) Log file: "/var/log/Xorg.2.log", Time: Sun Sep 1 11:59:11 2013 > List of video drivers: > intel > fbdev > vesa > (++) Using config file: "/root/xorg.conf.new" > (==) Using config directory: "/etc/X11/xorg.conf.d" > Number of created screens does not match number of detected devices. > Configuration failed. > Server terminated with error (2). Closing log file. > cp: can't stat '/etc/xdg/openbox/autostart.sh': No such file or > directory > > Hmmm, seems something went wrong? > > > Concerning libdrm-intel, it has already been downloaded by tazx: > > Connecting to mirror.slitaz.org (91.121.171.224:80) > libdrm-intel-2.4.45. 100% |*****************************************| > 42192 0:00:00 ETA Installation of: libdrm-intel > ========================================================================================== > Copying libdrm-intel... [ Done ] > Extracting libdrm-intel... [ Done ] > Extracting the pseudo fs... [ Done ] > Installing libdrm-intel... [ Done ] > Removing all tmp files... [ Done ] > ========================================================================================== > libdrm-intel (2.4.45) is installed. > > Well, now I have a bad new and a good new for you. > The bad one: > I wanted to blank a CD-RW to burn it with the iso and try it on my > old computer. It seems nothing happens: the message Blanking entire > disk is displayed and nothing else, unable to eject CD-RW but it was > blanked. Then I tried to burn it: > > wodim: Bad Option: speed=0.000000. > Usage: wodim [options] track1...trackn > > Use wodim -help > to get a list of valid options. > > Use wodim blank=help > to get a list of valid blanking options. > > Use wodim dev=b,t,l driveropts=help -checkdrive > to get a list of drive specific options. > > Use wodim dev=help > to get a list of possible SCSI transport specifiers. > > and the disk wasn't burned. There is something wrong with wodim > > The good one now: > I burned it from rolling and had the stupid idea to try it on the > Fujitsu first... and it works! The problem comes the way I boot in > frugal mode; remember, I do it from iso. > > Here is my entry in grub.cfg: > > # Booting SliTaz-test with kernel 3.2.50 from ISO file > menuentry "SliTaz-test/kernel 3.2.50 (02/09/2013), frugal install > from ISO file on Lifebook" { loopback CD > (hd1,2)/frugal/rolling/slitaz-test-3.2.50-03092013.iso linux > (CD)/boot/bzImage root=/dev/null kmap=fr-latin1 autologin initrd > (CD)/boot/rootfs.gz } > > Is there something wrong with it? I used grub2 because grub4dos does > not like NTFS partitions. I must recognize that in this way SliTaz > does not start as from an iso with grub4dos on my old Asus. I just > tried with a traditional frugal install and it works too. I'll try > this week end from iso with grub legacy; I prefer this way because no > need to mount the iso, copy files... If it works well, I'll give up > grub2. > > I'M REALLY SORRY FOR MAKING YOU WASTE YOUR TIME for a problem that > was not one, but... I tested on my Asus and I've got a problem with > the screen resolution. It seems it's not possible to change it via > Applications > Preferences > Monitor Settings. I ran tazx too, to > download the nV driver but same; my controller is a nVidia > Corporation NV11DDR [GeForce2 MX200]. Works fine with SliTaz 1 to 4. > > i will copy this message in the forum when it'll be restored (I don't > like very much the mailing list, not enough clear for me). Have a > good night! > -- SliTaz GNU/Linux Mailing list - http://www.slitaz.org/
