> I have a Magic TV and can't get it to work. It has a bt878 chipset and
> a Temic tuner crystal. supposedly it can do pal/ntsc and secam. could
> someone please help me with the modprobe options that i have to use?
I had the model down from that one (didn't have an 878 or the radio
tuner). When I offered Dynalink documentation on how to get it going under
linux I was asked if I had to use the Windows drivers. :)
You need four modules, videodev, i2c, tuner and bttv (video4lixux + bttv
kernel support). The following worked for the card below. You probably
need to change the tuner 'type' though.
tuner type=0
bttv card=1 pll=1
It took me a while to find out the modules even _had_ load args, once I
had them though the card proved to be a sweet little toy, until I gave it
to a mate. :)
-- adm
// you're not neo, and this aint the matrix
--
SLUG - Sydney Linux Users Group Mailing List - http://www.slug.org.au
To unsubscribe send email to [EMAIL PROTECTED] with
unsubscribe in the text
