Hi I have just tried to get X running on my Ti Powerbook. Finished the debian install and can login fine but startx fails to start X.
I selected ATI for the chipset and a display resolution of 1152 x 864 @ 75Hz. It asked for a bus vide location and I left it at the value it detected at 0:16:0 But when I startx I get: ATI: PCI/AGP Mach64 in slot 0:16:0 could not be detected. No devices detected. dmesg indicated that it "failed to detect the DFP panel size" and "Using unsupported 1280x854" ""no frame buffer address found" Whats the command to use to reconfigure this manually without having to reinstall. /usr/bin/X11/xf86cfg fails with sig 11 fault I have run the xf86config script ok and selected 1024x768 as safe bet but still get same error. Any help from someone who is familiar with a Ti PowerBook? -- Mike Lake Uni of Technol., Sydney UTS CRICOS Provider Code: 00099F DISCLAIMER ======================================================================== This email message and any accompanying attachments may contain confidential information. If you are not the intended recipient, do not read, use, disseminate, distribute or copy this message or attachments. If you have received this message in error, please notify the sender immediately and delete this message. Any views expressed in this message are those of the individual sender, except where the sender expressly, and with authority, states them to be the views the University of Technology Sydney. Before opening any attachments, please check them for viruses and defects. ======================================================================== -- SLUG - Sydney Linux User's Group - http://slug.org.au/ More Info: http://lists.slug.org.au/listinfo/slug
