Hello David, I also have one of these devices and have no trouble with k3b recognising the burner. and the system does auto mount the hard drive on the device. I am running the 64Bit version of Mandrive 2006.0 Perhaps you have a system problem!!!! Gerald
On Wed, 17 May 2006 01:00 pm, david wrote: > I bought this gadget thinking that I could test HD's conveniently > without having to install them internally. Unfortunately it's not > automounting, so now I'm not sure what to do. > > Can anyone suggest how I get it to mount? > > USB seems to be seeing it OK. > /proc/bus/usb/devices includes this: > T: Bus=01 Lev=02 Prnt=04 Port=02 Cnt=01 Dev#= 14 Spd=12 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=152d ProdID=2338 Rev= 1.00 > S: Manufacturer=JMicron > S: Product=USB to ATA/ATAPI Bridge > S: SerialNumber=152D203380B6 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 > Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html