mii-tool does not support gigabit. Joel
On Mon, Jul 28, 2008 at 5:34 PM, Tony Sceats <[EMAIL PROTECTED]> wrote: > Hi Sluggers, > > Anyone ever had mii-tool and ethtool tell them different things? As you can > see the duplex setting is being reported differently (this is a Broadcom > Corporation NetXtreme II BCM5706 Gigabit Ethernet (rev 02)). Does anyone > know of another method to check the Duplex setting so I can verify which > one > is correct? > > (btw, I had changed the settings using mii-tool) > > # ethtool eth0 > Settings for eth0: > Supported ports: [ TP ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Full > Supports auto-negotiation: Yes > Advertised link modes: Not reported > Advertised auto-negotiation: No > Speed: 100Mb/s > Duplex: Half > Port: Twisted Pair > PHYAD: 1 > Transceiver: internal > Auto-negotiation: off > Supports Wake-on: g > Wake-on: d > Link detected: yes > # mii-tool -v eth0 > eth0: 100 Mbit, full duplex, link ok > product info: vendor 00:08:18, model 21 rev 2 > basic mode: 100 Mbit, full duplex > basic status: link ok > capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD > advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control > -- > SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ > Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html > -- SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/ Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
